Floating or Fixed Dock for RO/RO Ship Operations
Floating pontoon-type dock structures are typically used for RO/RO ship berthing. Primary advantage of a floating dock for RO/RO berthing is the relatively constant height relationship...
Modern Crane Control Enhancements
Terminal operators are continually looking for innovative ways to enhance the productivity and safety of their container cranes. This paper discusses examples of control enhancements that...
Upgrading Today's Terminals for Tomorrow's Needs
This paper describes how a 1940's vintage, timber pile supported wharf is being modernized to serve post-Panamax ships: how the Massachusetts Port Authority (MASSPORT) is rebuilding their...
Replacement of a Deteriorated Steel Sheet Pile Bulkhead
This paper presents a life history of a marine steel sheet pile bulkhead, over 35 years old, that has been exposed to a salt water environment with minimal maintenance or repair in the...
Historic Seawalls of the Boston Harbor, Massachusetts Region: Evolution, Construction and Repair
The earliest seawalls in the Boston region were of crib construction. Cobb cribs had an open framework and could readily be floated into position and sunk with rock from local sources....
Draft Chapter 2?Planning and Design Guidelines for Small Craft Harbors?Entrance Design and Breakwaters
The paper will present a very preliminary draft of the second chapter of an ASCE manual that is currently being developed. The new manual is entitled Planning and Design Guidelines for...
Multiuser Sites for Contaminated Sediment Disposal
The Washington Department of Ecology (WDOE) recently adopted a program to identify, rank, and clean up contaminated sediment sites in Puget Sound. Site cleanup, in conjunction with dredging...
Modeling Variable Width Buffer Zones with a Geographic Information System
It is possible to gain significant protection of water resources from nonpoint pollution with buffer strips, but frequently a single width strip is not appropriate. Geographic information...
Engineering Aspects of Wetland Design
Successful wetland enhancement, restoration, or creation projects require integration of desired wetland functions, local hydrologic and soil conditions, and biological requirements into...
System Operating Strategies in Water Rights Modeling and Analysis
The appropriative surface water rights permit structure in Texas has provided the impetus to develop TAMUWRAP, a river basin simulation package that will allow the response of multiple...
Design and Maintenance of Rural Water Supply Systems for Improved Performance
During the period 1980-1990 the United Nations sponsored a comprehensive effort to bring potable water supplies throughout the world. For many urban and rural areas in developing countries...
Fingerprint Identification of Groundwater Petroleum Contamination Using Synchronous Scanning Fluorescence
Synchronous scanning fluorescence spectroscopy, SSF, is a simple, cost effective method for the fingerprint analysis of many petroleum contaminates in groundwater and soil samples. The...
Delaware Estuary Nonpoint Source Control Program
Preparation of the Delaware Estuary Management Plan, sponsored by the EPA and the three states of New Jersey, Pennsylvania and Delaware, is part of the national estuaries program. As part...
Computing in Civil Engineering and Geographic Information Systems Symposium
This proceedings consists of the papers presented at the Eighth National Conference on Computing in Civil Engineering and Geographic Information Symposium, held in conjunction with A/E/C...
Engineering, Construction, and Operations in Space III
This proceedings,
Reuse Rules
Cities that discharge sewage effluent to surface water are under increasing pressure to reduce concentrations of heavy metals, ammonium and nitrate, and substances such as toxic organic...
Building Better Bridges: Concrete Vs. Steel
The authors debate the merits of concrete segmental and steel bridge design and construction based on five criteria: initial and life-cycle costs; structural advantages; durability; construction...
The Diagnosis of Pavement Ills
The paper defines the 'health' of a road pavement in terms of parameters of serviceability, safety and structural integrity and defines 'illness' as any departure from 'healthy' values...
Masonry as a Structural Material
Four case studies are presented which illustrate the use of masonry as a structural material. Results of laboratory studies for unreinforced piers subjected to in-plane lateral forces,...
Application of SMA Technology in Georgia
In 1991, the Georgia Department of Transportation participated in a cooperative effort with the Federal Highway Administration to conduct one of a series of field evaluations of Stone...
Return to search