Application of Bayesian Methods to a Geotechnical Site Investigation in Mississippi
In 1981, the Army Corps of Engineers constructed an ammunition storage area at Bay St. Louis, Mississippi. This storage area is part of the Mississippi Army Ammunition Plant (MSAAP). Prior...
Fracture Mechanics Fatigue Reliability Assessment Employing the Most Probable Point Locus Method
The statistical distribution of cycle life, N, could be easily constructed if N were an explicit function of the design factors. A simple strategy for constructing the distribution of...
Probabilistic Design of Flexible Pavements
Numerous random phenomena enter into the process of deterioration of pavements under the effect of traffic. It is felt that improvement in current design methods could be obtained by adopting...
Reliability of Geotechnical Systems Considering Geological Anomaly
Anomaly statistics at a given site are first assessed through Bayesian methodology on the basis of site exploration data. Several methods may be then used to incorporate the anomaly uncertainties...
Multicriterion Reliability-Based Optimization of Structural Systems
The optimization of nondeterministic structural systems under random loads is currently performed by single-criterion reliability-based optimization methods. However, in structural design...
Probabilistic Design of Offshore Structural Systems
Probabilistic design of structural systems is considered in this paper. The reliability is estimated using first-order reliability methods (FORM). The design problem is formulated as the...
Analysis of Bridge Truck Loads
The development of the reliability-based load and resistance factor design (LRFD) methodology requires uncertainties in loads and resistance be quantified. In the load capacity evaluation...
Research Needs for Rational LRFD Criteria
There are at least a dozen factors causing or influencing impact. Current design specifications consider only a few of these. Location of truck wheel loads within the traffic lanes on...
Bridge Reliability?Evaluation vs. Design
Probabilistic methods of structural safety are being widely accepted as a basis for rationally considering uncertainties and developing reliability based design specifications for various...
MA to ARMA Two-Stage Monte Carlo Simulation
A prior autoregressive (AR) model can be the basis to obtain a quite eficient and reliable subsequent autoregressive moving average (ARMA) approximation. The design of the AR system which...
Applications of ARMA Models for Seismic Damage Prediction
As an alternative to current design practice which is based on peak measured ground motions and scaled records from different events, individual earthquake records are treated as samples...
Rehabilitation of Highway Bridges: Design and Operational Considerations
The design of a rehabilitation of a bridge which must maintain some lanes of traffic requires special consideration of construction procedures and traffic control, which are discussed...
Reliability Based Optimal Structural and Mechanical Design
A reliability based optimal design strategy has been developed. Nonlinear limit state functions and nonnormal random variables can be accommodated. For structural systems analysis, a failure...
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Reliability Analysis of Single-Headed Anchor Bolts
Several design equations for predicting the capacity of single-headed anchor bolts embedded in plain concrete have been recommended in the United States. The capacities predicted by these...
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Effect of Air Gap on Platform Reliability
A simplified reliability study of the effect of lateral wave forces impacting the deck of a fixed platform is presented. The reliability of the deck legs, considered the primary resistance...
Resolving Reliability Issues for an Offshore Platform Code
A fixed steel offshore platform design specification based on reliability concepts has been developed which could become an alternate to the existing working stress code, American Petroleum...
An Intelligent Design Support System for Computer-Aided Site Development
This research proposes an intelligent design support system (DSS) integrated with a CAD environment for building site planning and development. The DSS is used for providing a good initial...
Return to search