An Infiltration Based Runoff Model For Use With a Design Store
The feasibility of using an infiltration approach for routine runoff prediction has become a reality with the development of approximate infiltration models based on physical principles...

Landfill Liner Hydraulics for Microcomputers
Two different models are presented for the study of sloping bottom liners for landfills. The first is based on the assumption that the leachate volume is uniformly distributed over the...

Incorporating 3-D Effects into a 2-D Model
Some three-dimensional (3-D) effects may be incorporated into vertically averaged two-dimensional models. This is demonstrated with a case study where the effects of a complex system of...

Automated Measurement of Soil/Water Properties
An automated data-acquisition system was constructed to permit continuous operation of laboratory equipment. The apparatus was used to monitor flow through fine-grained, 'undisturbed'...

Analytic Solution for Seepage from Saturated Soil Behind a Braced Wall
The locations of streamlines and equipotentials for two-dimensional flow in the vertical plane normal to a vertical retaining wall can be determined by various methods. Recent extension...

Instrumentation for an Uplifting Ice Force Model
Pile-supported, light duty structures are especially vulnerable to the uplifting forces. To evaluate the parameters that control the magnitude of the uplifting force a laboratory model...

Development of a Practical Method Simulating Oil Spill Migration (OSPIM) in Soils
Many ground-water modeling studies can be performed on currently available microcomputers. The greatest problem associated with the proliferation of ground-water modeling software for...

Ground-water Modeling on Small Computers: Past, Present, and Future
The paper reports on research that concerns the possible development of numerical models being able to simulate practical cases of Oil Spill Migration (OSPIM) in soils. Such models can...

Design of Guideway Substructure Dada County METROMOVER
This paper describes the procedures and parameters used for the design of the guideway substructure for the Dade County METROMOVER system. The substructure for this work is defined to...

Summary Evaluation of Dade County's APM Foundations
This paper presents an overview of the engineering performance and cost effectiveness of the guideway and station foundations of Dade County's Automated People Mover (APM)....

Unique Considerations in the Detroit DPM Foundation Design
Foundation design for the guideway of Detroit's Downtown People Mover (DPM) was influenced by a variety of unique considerations. Severe loading conditions were created by...

Can We Save the Ogallala?
The useful life of the Ogallala Aquifer, which underlies seven western states, can be extended indefinitely through water conservation in the widest sense of the term. In addition to optimization...

Type C Fly Ash and Clay Stabilization
Because the soils onsite have a high swell potential, a 37 foot high retaining wall was designed with counterforts and was supported by pier foundations to limestone. In order to reduce...

Tensile Fracture and Fatigue of Cement Stabilized Soil
Portland cement stabilized soil is widely used as a base material for roads, airfields, and similar structures. Cracking in this material is studied using fracture mechanics concepts....

Soft Ground Tunneling of the Greenbelt Tunnels
Mergentime/Loram's contract for the construction of Section E-1d Greenbelt Route Tunnels includes construction of dual 1,770-foot tunnels in soft ground, a crossover structure,...

Flint Tunnel?A Project of Change and Challenge
The talk will deal with construction of a 12' diameter (8. 5' finished) tunnel in the City of Flint, Michigan. This 5-mile long sewer tunnel was constructed through...

Construction of Mt. Baker Ridge Tunnel
Mt. Baker Ridge Tunnel is a large diameter soft ground highway tunnel constructed through sensitive over-consolidated silts and clays. Its large diameter necessitates the construction...

On Cyclic Testing with Thin Long Hollow Cylinders
The hollow cylinder device has emerged in recent years as an important tool in the investigation of the dynamic behavior of soils. This paper reviews the stress conditions present in the...

Liquefaction Flow Failure of Silty Sand by Torsional Cyclic Tests
The use of undrained strain-controlled cyclic torsional loading of anisotropically consolidated triaxial specimens (CyT-CAU tests), is proposed for evaluating liquefaction flow failure...

Torsional Simple Shear Apparatus for Drained and Undrained Cyclic Testing
Since a cyclic triaxial compression apparatus was first used to study liquefaction of saturated sandy soil, many different types of cyclic shear devices have been used to investigate drained...

 

 

 

 

Return to search