Paving with RCC
Roller compacted concrete pavement differs from the RCC used for dams. Since 1984, when the first full scale RCC pavement in the U.S. was installed by the Corps of Engineers at Ft. Hood,...
Francis Turbine Surge Prediction and Prevention
Every Francis turbine has some range(s) of load where the flow in the draft tube is subject to fluctuations. Various types of surge during 'steady-state' operation...
Advance Prediction of Flow-Induced Variations
Frequency analysis of hydraulic vibrations has been applied using a transfer matrix and impedance method. The computer program is given for the self-excited and forced vibrations, together...
Dynamics of Machine Foundation
The art of designing machine foundations, supporting vibratory load has changed from the approximate rule-of-thumb to the scientifically sound engineering procedure. However, the vast...
New Techniques in Forced Vibration Testing
Forced vibration testing is a well established technique as indicated by references 1 to 8. This paper describes a system for forced vibration testing developed over two years during work...
Design and Planned Use of a 2-Kiloton Eccentric Mass Vibrator
High-level testing of large civil structures is usually not practical, due to structural damage considerations and available testing equipment. However, in the case of a joint American/German...
Vibration Tests of Reservoir Structures Outlet Tower and Footbridge
This paper presents a field test procedure used in determining the dynamic properties of an outlet tower and footbridge for a major reservoir. Such factors as virtual water mass, soil-structure...
Use of Vibration Tests to Determine Lateral Load Paths in Medium Rise Buildings
A structural system identification procedure is described in which an initial analytical model of a building is modified until it predicts accurately the mode shapes and natural frequencies...
Adaptation of Modal Testing Procedure to Shaker Tables
This article presents a technique for adapting current modal testing procedures to shaker table tests commonly used for qualification tests of nuclear and space related equipment. It involves...
Vibrations of Submerged Solids in a Vibrating Container
Dynamic forces on a vibrating submerged solid cylinder in both closed and open-top rectangular containers are evaluated. The submerged cylinder is attached to the base of a dynamically-excited...
Modal Analysis of Random Vibration with Hysteresis
A model for the zero or non-zero mean random vibration response of hysteretic plane frames is summarized, in which the plane frame is idealized as a series of elastic sub-elements connected...
Random Vibration of Mass-Loaded Rectangular Plates
The classical method of separation of variables in conjunction with the Green's function of the vibrating plate is used to obtain the solution of the free vibration problem...
Stochastic Response for Tertiary Systems
A modal superposition method is presented for obtaining the response of a single-degree-of-freedom tertiary subsystem mounted on a primary-secondary system. The method is direct in that...
Rigid Body Random Rocking Prediction
The stochastic rocking of a rigid block due to shaking of its foundation is examined. The foundation is flexible (Winkler) and its independent springs and dashpots separate from the block...
Constrained Viscoelastic Layers for Passive Vibration Control of Structures
Infills with constrained viscoelastic layers for increasing the energy absorption capacity of structures are examined. The infills are expected to 'work' in the...
Ambient Vibration Testing of the Foothill Communities Law and Justice Building
This paper presents the results of two ambient vibration tests conducted on the Foothill Communities Law and Justice Center Building. One ambient test was performed in 1985. The second...
Damping in Tall Buildings: Its Variability and Treatment in Design
Increasingly, damping is being recognized as an important factor in the design of structures. It is at the same time a property which is relatively poorly defined, more acquired than engineered...
Damping Systems to Limit the Motion of Tall Buildings
Two types of damping systems have been used successfully in building applications - the Tuned Mass Damper, and Viscoelastic Damping Units. In the past, Tuned Mass Dampers were used in...
Performance of Viscoelastic Structural Dampers for the Columbia Center Building
Vibratory motion of structures such as buildings, bridges, and floors can be reduced by the use of viscoelastic (V. E. ) dampers. Such dampers transfer part of the vibratory energy of...
Recent Advances in Structural Dynamics
The four papers in this book emphasize the design, testing, and analysis of large structures. The topics covered include base isolation in the design and construction of power plant structures,...
Return to search