Modelling Longitudinal Temperature Distribution in TVA Reservoir System
A one-dimensional model has been developed for computation of water temperature in the TVA reservoir system. The model has been successfully used in evaluating the impact of incremental...

A Review of Modeling and Analysis Approaches for Optimization of Reservoir System Operations
Numerous mathematical models have been developed for sizing reservoir storage capacities and establishing operating policies during project planning, for reevaluating the operating policies...

Application of a Generalized Risk Dynamic Model to a Spillway Design Flood
Risk analysis can provide a logical basis for selecting the optimal design capacity of a flow conveyance hydraulic structure for the least total cost or specified non-exceeding risk levels....

Visualization of a 3D Model of Chesapeake Bay
A three-dimensional (3D) numerical hydrodynamic and water quality model (WQM) of the Chesapeake Bay and its major tributaries has been developed by the US Army Engineer Waterways Experiment...

Visualization of a Groundwater Contaminant Model
Groundwater contamination is a problem of major national concern. Three-dimensional characterization of groundwater contamination is typically required. This paper describes integration...

Visualizing Groundwater Flow
This presentation demonstrates the application of some public domain scientific visualization software tools in the area of groundwater modeling. Specifically, we use these tools to interpret...

A Three-Dimensional Natural Resource Damage Assessment and Coupled Geographical Information System
A numerical model for natural resource damage assessments is discussed. The model addresses a wide range of spatial and temporal scales. The transport equations for both pollutant and...

An Integrated Model for Fate and Transport of Oil in Rivers
An integrated oil spill model for microcomputers is developed for simulating fate and transport of spilled oil in rivers. This model can simulate the oil slick transformation in transient...

Numerical Model Development for Oil Spill Dispersion into the Marine Environment
A 3-D oil spill model was developed to study the behaviour of heavy spilled oil in the sea. The model could describe the behaviour on the spilled oil on the sea surface, throughout the...

Sediment Modeling of Dam Removal Alternatives, Elwha River, Washington
The new version of the U.S. Army Corps of Engineers (ACOE) 1-Dimensional sediment transport model, HEC-6 'Scour and Deposition in Rivers and Reservoirs', was...

Sediment Problems Associated with Dam Removal, Muskegon River, Michigan
This paper presents an analysis of sediment movement in Michigan's Muskegon River following the removal of Newaygo Dam. The analysis utilized a physical process simulation...

Chesapeake Bay Data Set for Three-Dimensional Hydrodynamic Model Verification
A comprehensive data set representing September 1983 conditions on the Chesapeake Bay has been assembled and is proposed as a possible data set for inclusion in the work of the ASCE Task...

3-D Hydrodynamic Model Verification Using ADCPS
A physically comprehensive, hydrodynamic model of the East River has been used for a continuous three year simulation. As part of the calibration process, detailed vertical profiles of...

Investigations on 3-D Flow Structures in Combined Systems of Groynes and Harbour Basins
The structure of the flow field in harbour basins shows significant three-dimensional (3-D) effects, e.g. variation of the direction of the horizontal velocity components with depth, existence...

Prescribed Solution Forcing Method for Model Verification
This paper describes a method for verifying the consistency and order of accuracy of a numerical implementation of a pde-model. We present an example of its application to a 3D hydrodynamic...

3-D Free Surface Flow Model Verification
This paper is intended to achieve two objectives: (1) providing the readers and participants of the 1991 ASCE National Conference on Hydraulic Engineering with background information about...

Computerized Hydraulic Modeling?A Case Study
A hydraulic model study is being conducted at the Alden Research Laboratory, Inc. (ARL), to study the effects of adding a hydroelectric generating station at the site of an existing lock...

Detecting the Twin Vortex Draft Tube Surge
Experiments were performed to investigate a twin vortex draft tube surge in a homologous model and the prototype 700-MW turbines installed at the U.S. Bureau of Reclamation's...

Model Study of a Hurricane Surge Barrier Gate Valve
Physical model studies were conducted to determine the hydraulic performance of a unique vertical butterfly-gated structure. These studies were also used to determine the torque on the...

Model Studies of Outlet and Intake at McCook Reservoir
Two separate physical models were used to investigate the outflow and inflow into the proposed McCook Reservoir. The proposed reservoir will be located in McCook, Illinois, and will serve...

 

 

 

 

Return to search