Random Aspect of the Stress Inside Granular Media
Micromechanics of granular media arose from the necessity of a better understanding of the relationship between the global behaviour of such materials and the physical phenomena which...

Use of Hierarchical Lattices for Predicting the Fluid or Stress Transfer in Concrete
Hierarchical lattices are used to study the influence of local disorder on the transfer of properties (stresses, strains, permeability) from the micro-scale to the macro-scale. They are...

On the Diffusional Stress Transmission
A probabilistic diffusional mechanism for the propagation of intergranular forces has been formulated as a set of three mathematical assumptions. The equilibrium equations are complemented...

Refined Analysis of Load Distribution Factors for Bridges
This paper presents a new approach for calculating the distribution factors for slab-on-girder bridges. This method considers the coupling of longitudinal and transverse effects. The governing...

Experimental Photoelastic Analysis of Tunnels Containing Cracks
Due to the presence of cracks the strength of the structure is decreased in the present paper an experimental two dimensional photoelastic technique has been developed to analyze the circular...

Frictional Aspect of Rocking-Sliding of a Rigid Block with Surface Impact
During the very short time of impact between a rigid rectangular block and a rigid foundation, the interface pressure distribution varies with time in a complicated manner. Due to this...

Probabilistic Micromechanics in Constitutive Modeling of Granular Material
This paper gives a review of newly developed probabilistic methods for analysis of the effect of randomness in geometry and physical properties at the microscale on their macroscale response...

Constitutive Modeling for Material with Perfect Disordered Heterogeneity
Finite element analysis with large number of elements are performed to simulate perfect disordered heterogenous material. The probabilistic nature of the micromechanical behavior of the...

Probabilistic Assessment of Composite Structures
Formal procedures are described which are used to computationally simulate the probabilistic behavior of composite structures. The computational simulation starts with the uncertainties...

First Order Importance Sampling Method and its Variance Reduction
This paper proposes an Importance Sampling method for structural system reliability problems with linearized modal failure surfaces. It has the advantage of locating all samples in the...

Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...

Slip Velocity and Temperature Jump in Flow over Rough Surface
The expressions for the slip velocity and the temperature jump are determined and used as the boundary conditions in the calculation of turbulent flow over rough surfaces. The slip velocity...

Discrete Markov Process Approach to Fatigue Crack Growth
The discrete Markov approach considered herein is simple to implement and uses a two-dimensional stochastic model in conjunction with simulation to estimate model parameters. The possibility...

Random Response of Multicrystalline Structures
An approach to the probabilistic modelling and analysis of multicrystalline microfabricated beams is presented with application to micro-electro-mechanical systems (MEMS). Random, textured...

Unconfined Granular Materials Thermalized by Fluctuating Horizontal Surfaces
We calculate the solid fraction and granular temperature throughout assemblies of identical, smooth, inelastic spheres that are unconfined from above and thermalized from below by bumpy,...

Inflation Instability of Cylindrical Membranes
A new procedure which investigates inflation instability of cylindrical nonlinear membranes is developed. The general characteristics of inflation instability are described. An efficient...

Influence of Gas Phase Turbulence on the Transport of Particles
An interesting and perhaps unexpected flow feature characterizing the transport of a gas-solid suspension in a vertical duct is the radial nonuniformity of particles over the tube cross-section....

Mars Containers: Dust on Teflon Sealing Surfaces
As part of an evaluation of suitable hermetic seals for containers for Martian rock and soil samples, teflon (TFE) o-ring static face seals were challenged with silica gel, basalt, and...

Shouldn't it be Transportation Impact Assessment?
A Traffic Impact Assessment is a single mode analytical tool that is used to evaluate new development proposals. Its use continues at a time when the transportation community is being...

Nowcast Protocol for the Great Lakes Forecasting System
The Great Lakes Forecasting System is a cooperative federal-university undertaking designed to implement a predictive system for each of the Great Lakes. The desired forecasts concentrate...

 

 

 

 

Return to search