Cement Manufacture and Use
This book,
Fracture Mechanics Applied to Geotechnical Engineering
This proceedings,
DSM Saves the Dam
The Miami Conservancy District built five flood control dams after the catastrophic flood of 1913 in Dayton, Ohio. Lockington Dam was one of these five hydraulic fill structures. The Ohio...
Shotcrete Tests at the Fish Ecca Tunnel
The Fish-Ecca Tunnel is situated in the Eastern Cape and forms part of the Lower Fish Irrigation Scheme. About 25% of the 5032 m tunnel had to be lined with shotcrete. Between February...
New Advances in Shotcrete Additives: The DELVO System
The DELVO system is a two component, nonchloride chemical system developed to control the dynamics of cement hydration. Concrete, treated with the DELVO system, can be kept in a plastic...
In Situ Testing Performed at Jackson Lake Dam
Jackson Lake Dam was rehabilitated from 1986 to 1988 to increase seismic stability. Final foundation improvements consisted of dynamic compaction and mixed inplace soil cement columns....
Ultrafine Cement Tests and Drilling Warm Springs Dam
Ultrafine cement was chosen by the Corps of Engineers for tertiary grouting the Warm Springs Dam because of its ultrafine particle size, low settlement, medium viscosity and longevity....
Manning's n From Experiments with Rainfall-Runoff on Portland Cement Concrete Surfaces
Experiments were conducted under artificial rainfall on Portland cement concrete (PCC) surfaces with variable mean texture depths (MTD) and slopes (S). Rain rates were varied up to 3 in/hr...
Bending of Retrofitted Test Foundation Walls
New repair methodology has been developed for residential construction that can be used to retrofit foundation bearing walls damaged by mine subsidence. The repair strengthens the foundation...
Use of High Strength By-Product Gypsum Bricks in Masonry Construction
A new research aimed at producing high strength masonry bricks to be bonded with several types of joint materials other than conventional cement mortar, is introduced in this paper. This...
Digital-Image-Based Computer Modelling of Cement-Based Materials
Understanding the relationships among materials, processing, microstructure, and properties is critical in improving material design. This paper outlines an approach for furthering this...
Stabilization of South Texas Soils with Fly Ash
The expansive soils of south Texas have traditionally been stabilized with lime or Portland cement. As an alternative, a class F fly ash was tried to stabilize expansive soils obtained...
Digital Image Processing
Techniques and Applications in Civil Engineering
This proceedings,
Evaluation of Compressive Strength for High-Strength Concrete by Pulse Velocity Method
Development of compressive strength and pulse velocity for high-strength concrete from the age of 5 hours are studied in relation to cementitious material types and curing conditions....
Automated Identification of Compression-Induced Cracking in Cement Paste
The development of image analysis techniques to identify cracks using scanning electron microscope images of hydrated cement paste is described. Cracks are identified based on both the...
The Microstructure of Hardened Cement Paste and Concrete
Concrete is a composite material created from a mixture of a binder (hardened portland cement paste) and a filler (fine and coarse aggregates). Like any other composite material the physical...
Micromechanics Based Design for Pseudo Strain-Hardening in Cementitious Composites
Micromechanical model constructed on the basis of fracture mechanics and fiber bridging provides a means of selection of fiber, matrix and interface property combinations for which short...
Fiber Suppressed Localization in Tension
Tensile fracture in portland cement based fiber composites is studied. Formation and propagation of stable microcracks is examined by means of holographic interferometry. Distributed microcracking...
A Monumental Task
The geotechnical consultants, structural engineer and contractor combined to overcome difficult soils, underground subway structures and buried utilities when building the foundations...
Concreting at Subfreezing Temperatures
Temperature affects the rate at which portland cement concrete develops strength. Below about 20?C, strength gain is retarded, whereas at higher temperatures it is accelerated. Strength...
Return to search