Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...

The NOVA SPAN Bridge System
The NOVA SPAN Bridge concept provides the basis for the design and construction of a new variant in the field of bridges and culverts which, in its performance and operation, incorporates...

Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...

Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...

Short-Term Versus Long-Term Pipe Ring Stiffness in the Design of Buried Plastic Sewer Pipes
It is often discussed which pipe ring stiffness should be used when designing the long-term deflection of buried plastic sewer pipes; the short-term value or the long-term value? As the...

Investigation & Rehabilitation of Seattle's Tolt Pipeline
Seattle Water Department's Tolt Pipeline brings water 24 miles from storage in the Cascade Mountains into city and suburban distribution systems. Twenty-three miles of this...

Column Separation in Pumped Pipelines
Pressure transients are common occurrences in water supply systems. Pipeline standards and design/testing techniques will normally provide sufficient protection for transmission and distribution...

Valve Control to Avoid Column Separation in a Pipe
Maximum pressures in a pipeline can be reduced significantly by closing the valve in an optimal manner. Such an optimal valve closure policy may result in some situations in minimum pressures...

Geometrical Nonlinearity in Offshore Pipelines
Pipelines are very flexible structural systems which are subjected to various boundary conditions. For instance, during the laying process, the pipes roll on the guidance tracks on the...

Whatever Happened to Long-Term Bridge Design?
The Chairman of the Board of one of the leading engineering firms in the nation ponders the future of American bridges. In today's designing of bridges, Thomas R. Kuesel points...

Seam Examination
Charron discusses the importance of seam sampling in geomenbrane installation. In 1988, about 30 million mi of polyethylene geomembranes were used to line landfills, liquid impoundments,...

Design of Ductile Iron Pipe on Supports
Design procedures for ductile iron pipe in normal underground service have been well established. The standard design considers hoop stresses in the pipe wall due to internal hydrostatic...

Performance of Pipe Spillways for Dams
The Soil Conservation Service has used several different kinds of pipe products for spillway conduits of dams. Materials with a shorter estimated life are used for smaller low hazard dams...

Whitfield Reservoir Inlet Outlet Pipeline
Alameda County Water District reports on the planning, design and construction of a 48-inch water main installed under modern urban circumstances. The location of the pipe and the construction...

Pipeline Design and Construction Using High Density Polyethylene (HDPE) Pipe
All pipelines and pipe materials must be designed and constructed to address the limitations of the pipe and fittings in order to insure acceptable performance of the line. Conventional...

Cheyenne Stage II Water Delivery Pipeline and Shoshone Municipal Water Supply Pipeline
This paper deals with the design and construction aspects of two pipeline projects in Wyoming. Located in southeastern Wyoming, the Cheyenne Stage II Water Delivery Pipeline consists of...

Pipeline Explodes, Two Dead, 31 Injured, 11 Homes Destroyed
A high pressure pipeline in a suburb of San Bernardino, California exploded in a deadly fireball on May 25, 1989. Damaged as a result of a train wreck several weeks earlier, or by the...

Design of Drainage Pipes Below Landfills
Drainage pipes are an essential component of landfills. Even though their embedment conditions differ substantially from those of pipes for municipal utilities near the ground surface,...

Designing Vitrified Clay Pipe Systems with EASE
NCPI has developed a computerized trench load design program which provides a broad and complete spectrum of design options which will enable engineers and contractors to safely design...

Optimal Design of Water Transmission Mains
Capital cost for constructing a water transmission main includes cost of the pipeline and its associated installation costs. Also included in the capital cost is the cost of a pump station....

 

 

 

 

Return to search