An Intelligent Design Support System for Computer-Aided Site Development
This research proposes an intelligent design support system (DSS) integrated with a CAD environment for building site planning and development. The DSS is used for providing a good initial...
Building Code Requirements for Masonry Structures and Specifications for Masonry Structures
The proposed Building Code Requirements and Specifications for Masonry Structures presented in this book were developed by the Joint American Concrete Institute, American Society of Civil...
Foam Over Troubled Toxics
Foams are now being used to control noxious vapor emissions from hazardous waste landfills. Another use of foams is in control of vapors emitted by chemical spills and fires. This article...
Priority Integrated Pipe Evaluation
The selection of the most suitable pipe for a given site involves the consideration of many factors affecting pipe performance. The factors to consider in sewer pipe evaluation and selection...
Current Developments in Reinsulating/Waterproofing Underground Steam Mains in New York City
The objective of Con Edison's reinsulation project is to develop the materials and technology necessary to reinsulate those steam distribution mains having excessive thermal...
Corrosion Monitoring of Critical Service Pipelines
Corrosion, including microbiologically influenced corrosion (MIC), is receiving much attention as a significant piping material performance concern particularly for critical service pipelines...
Iowa's Experience with Various Types of Pipe in Natural Gas Service
The Utilities Division, Iowa Department of Commerce, is responsible for the rate, service, and safety regulation of utility companies in the State of Iowa. This paper will summarize a...
A Multilayered Model for Analysis of Composite Pipes
A multilayered model is developed to analyze the behavior of composite pipes, such as prestressed concrete pipe, to the combined effects of internal pressure and applied loads. The pipe...
An Investigation of Field Performance of Reinforced Plastic Mortar Pipes
Every year many new pipe materials appear on the market for various applications. One of the important factors the design engineer and the user should consider while evaluating new products...
The Use of Restrained Joint Ductile Iron Pipe
This paper addresses some of the problems we at U. S. Pipe have observed from restrained joint installations during the past several years and the solutions devised. The restrained joints...
Thrust Restraint of Buried Ductile Iron Pipe
It is the intent of this paper to present current state of the art thrust restraint design, present a basis for calculating required lengths of restraint, and to offer some practical suggestions...
Design of Ductile Iron Pipe Systems
To ensure a reliable, low maintenance infrastructure capable of withstanding the test of time, proper initial design is essential. The basis of the design standard for ductile iron pipe...
Sliplining with Ductile Iron Pipe
The utilization of Ductile Iron Pipe (DIP) as an alternative to be considered for sliplining rehabilitation of sewer pipelines is evaluated. A recent experience in sliplining a failing...
Rehabilitation of Terminal Ballast Water Piping
In order to maintain the integrity of the ballast water piping system at the Marine Terminal of the trans-Alaska pipeline, a composite lining system was installed in the 42-inch (1,067...
Buried Pipeline Research Needs
A workshop was convened with representatives from universities, consulting engineering and research organizations, pipe and/or equipment manufacturers, constructors, users, and government...
New Pavement Materials
New materials and construction techniques are constantly being evaluated to extend pavement life and to improve overall performance of highway and airfield pavements. To be beneficial,...
Cable Stayed Bridges
Two of these five papers on cable-stayed bridges deal with wind analysis. One develops the theory for motion due to flutter and reaches the conclusion that the vibrations are, in general,...
Embankment Design and Construction in Cold Regions
This book is a state-of-the-practice report on embankment design and construction in cold regions involving either permafrost or seasonal frost areas. The similarities and differences...
Effects of Oil Spills on Water Retention in Sandy Soils
This paper concerns the relationships between water and oil saturations in sandy soils. Special attention is given to an environment similar to the groundwater table and the capillary...
Underdrain Tube Wall, Perforation Design and OBPA to Minimize Bio-Chemical Clogging
Bio-chemical clogging of underdrains has been most frequently associated with iron deposits (ochre). The underlying sticking agents have been a variety of bacteria and their exudates commonly...
Return to search