Computer Optimization of a Groundwater Treatment Facility
A computer model has been developed to optimize the operation of a groundwater oil recovery treatment plant. The site consists of 24 pump and treat recovery wells which lead to a treatment...
Risk-based Analysis of Major Rehabilitation of Hydraulic Structures Using REPAIR
This poster session presents a demonstration of a computer model developed by the Corps of Engineers to analyze investment proposals. The primary purpose of the model is evaluate investments...
Biodegradation Modeling of a Closed Landfill Site
The two-dimensional model, BIOPLUME II, was applied to the closed Becker County Landfill at Detroit township, Minnesota, to study the transport of hydrocarbons occurring at the site. The...
CHEMFLO Modeling of Aquifer Bioremediation in Vadose Zone
This paper deals with bioremediation in the vadose zone with an emphasis on using numerical models as a tool to ensure that the concentration of nutrients is maintained at a required level....
The Timberlake Dam Failure: A Hydrometeorological Assessment
Extremely heavy rainfall over the Timberlake basin in southwest Virginia on 23 June 1995 caused an earthen dam to fail and resulted in fatalities. The meteorological conditions are examined...
COASTMAP: An Integrated System for Environmental Monitoring, Modeling and Management
The development of COASTMAP, an integrated system for environmental monitoring, modeling and management for fresh and marine waters, is presented. The system allows the user to collect,...
Runoff Forecasting Using a Local Approximation Method
Forecasting of hydrological events, particularly floods, is an important topic of concern for hydrologists. Flood hazards can be prevented or their effects minimized if prior warning of...
Research to Application: Network Models to Simulate Flow and Transport in Heterogeneous Media
Effective groundwater cleanup requires accurate site-specific information on cleanup processes. Numerical simulations limit the need for expensive field experiments and provide details...
Computational Tools for Subsurface Conceptualization
Development of subsurface conceptual models for use in groundwater flow and transport modeling requires that existing data in the form of boring logs, cone penetrometer (CPT) logs, geophysical...
The DOD Groundwater Modeling System: A Conceptual Model Approach
A suite of new simulation tools have been developed in the version 2.0 of the Department of Defense Groundwater Modeling System (GMS). These add considerable complexity to the GMS which...
Role of Vegetation in Hydraulics of Channel Restoration
Boundary layer theory is used to develop a backwater model for flows through vegetated waterways which can be employed to approximately estimate flow depth variation in channel restoration...
Subcatchment Parameterization for Runoff Modeling Using Digital Elevation Models
Numerical algorithms are presented to estimate the length, width and slope of rectangular planes representing irregularly shaped overland contributing areas defined on raster Digital Elevation...
A DEM Based Hydrologic and Sediment Transport Model
A DEM-based, physically-distributed model was developed for simulating event runoff and erosion on an agricultural watershed. Runoff was described using the diffusion equation with flow...
Effects of Spatial Data Resolution and Subarea Size on a Distributed Runoff Model
Spatial data layers of elevation, land use, and soils for a small agricultural watershed in Pennsylvania were used to study the effect of resolution degradation of raster data on the output...
Developing Parameters for a Quasi-Distributed Runoff Model Using GIS
The widespread availability of radar precipitation data is driving rainfall-runoff modeling from lumped-input to distributed-input methods. As a consequence, model parameterization is...
Modeling 3D Free Surface Flow in Compound Channels: A Validation Case Study
This paper presents the results of a validation study of a free-surface flow model. For the validation, experimental data collected in a compound open channel is used. This validation...
A System Approach for Identifying and Improving Hydraulic Numerical Modeling Reliability
A system response approach which uses Fourier transform through a multiple-input/ single-output (MISO) nonlinear system to evaluate the model performance of verification and simulation...
Modeling the Impact of Uncertainty in Spatial Variability of Estuarine Boundary Conditions
Multi-dimensional numerical estuarine models that consider baroclinic forcing require the specification of both the water surface and the water density (salinity and temperature) at the...
Modeling the Impact of Sea Level Rise in Delaware Bay
A three-dimensional model of the Delaware Bay has been employed to provide insight on the impact of a 1.0 ft (0.304 in) sea level rise on salinity conditions in Delaware Bay. Model results...
Groundwater Flow Component of a Wetland-Dynamics Model
A 3-D groundwater flow model was developed to study the hydrology of groundwater-fed wetlands. Initial model results, including steady and unsteady simulations, compare well with existing...
Return to search