Using a Linearized Yield Surface in Dynamic Analysis
This paper describes an application of the finite element method to dynamic analysis of systems which exhibit material nonlinearity. A time history approach is used with a central difference...

Vibration of Plates with Corner Stress Singularities
A method of analysis is presented to determine the free vibration frequencies of plates having corner stress singularities. Displacements are assumed in the form of polynomials, and corner...

Linear Elastic Finite Element Analysis of Axisymmetric Shells on Elastic Foundations
Thin-walled cylindrical silos containing compacted bulk solids show a significant increase in strength over empty silos under meridional compression. A finite element model is used which...

The Analysis of a Spherical Shell
The analysis of a spherical shell may be performed by using the integral equation method. For a continuum structure, this method is computationally efficient and requires simple input...

Curvature Effects on the Deflection and Vibration of Cross-Ply Shallow Shells
The use of high performance materials is becoming increasingly significant in structures subjected to severe loading conditions. Effects of curvature on the stiffness characteristics of...

Optimal Control Configuration for Active Control of Structural Vibrations
An active tendon control mechanism is used to control the vibrations of a bridge-like structure. A single control force controls three modes of vibrations. Special attention is paid to...

Input-Output Discrete-Time Control of Structures
This paper outlines an approach for active control of structures based on the identification of a linear difference equation to describe the control loop and the design of a discrete-time...

Spatial Coherence in the Chaotic Dynamics of Multi-Degree-of-Freedom Elastic Impact Oscillators
In this paper, we describe a method for estimating the number of degrees of freedom needed to adequately model nonlinear structural systems. We apply the method to the study of chaotic...

Experimental and Numerical Chaos in Continuous Systems: Two Case Studies
Motivated by recent numerical investigations according to which certain types of deep-water compliant offshore structures may experience undesirable chaotic motions, two types of experimental...

Chaotic Response and Stability of Rocking Rigid Objects
An analytical method and numerical results for predicting the existence of chaotic response of rocking rigid objects subjected to harmonic horizontal based excitation are presented. It...

Chaotic Analysis of Dynamic Bifurcation of Viscoelastic Shallow Arches
Periodic and chaotic motions in a mathematical model of an imperfect, viscoelastic shallow arch under a dynamic sinusoidal load for both the symmetric and the coupled unsymmetric responses...

System Identification Techniques for Inelastic Structures
A classical optimization algorithm is used to identify the parameters of a smooth hysteretic restoring force model, which can be used to describe the inelastic behavior of structures under...

Response of Nonclassically Damped MDOF Systems to Nonstationary Random Excitation
A procedure for calculating the dynamic response of a nonclassically damped multi-degree-of-freedom (MDOF) system to nonstationary non-white vector-valued random excitation is developed...

Response Triscpectrum for a Yielding Structure
Simulation is used to obtain information about non-Gaussian aspects of the absolute response acceleration of a bilinear hysteretic oscillator with an excitation which is Gaussian white...

Adequacy of Statistical Linearization for Nonlinear Degrading Structural Systems
An investigation is carried out to examine the validity of current practice in using statistical linearization method for nonlinear degrading structures subject to random ground acceleration....

Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...

Elastic Stability of Non-Rectangular Plates
Non-rectangular plates may have infinite number of geometric configurations. Idealized pattern of practical shapes is chosen to be a sample for these plates. The present paper is concerned...

Poisson Instability of Laminated Composite Plates
The paper considers the uniaxial buckling of rectangular, anisotropic composite laminates with in-plane restrained unloaded edges where Poisson's effect is predominant to...

Sensitivity Analysis of Connection Stiffness in Orthogonal Frames with End-Plate Connections
According to AISC-LRFD specification (1986), two types of construction for steel frame structure can be assumed which are Type PR (partially restrained) and FR (fully restrained) constructions....

Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...

 

 

 

 

Return to search