Discrete Markov Process Approach to Fatigue Crack Growth
The discrete Markov approach considered herein is simple to implement and uses a two-dimensional stochastic model in conjunction with simulation to estimate model parameters. The possibility...
Interaction Effects in the Hybrid Control of Euler-Bernoulli Beams
The effect of viscous and Voigt damping upon the open loop response of simple continua such as Euler-Bernoulli beams is well understood. However, when attempting to control a distributed...
Recent Findings in Active Structural Control
Over the past decade, tremendous advancements have been made in the development of structural control paradigms and in the necessary supporting technologies. The fundamental paradigm that...
Structural Control Under Stochastic Seismic Loads
This paper presents a method of controlling nonlinear and hysteretic civil engineering structures subjected to stochastic earthquake ground excitations. Emphasis is placed on control of...
Pressure Losses Across Sequential Stenoses in Collapsible Tubing
The fluid dynamics of a model of a diseased artery with multiple stenoses were investigated in a recirculating steady-flow system over a range of Reynolds numbers (Re) from 30 to 1100....
Lumped Parameter Model for the Dynamics of the Pulmonary Circulation
The pulmonary circulation is a low pressure system such that respiration has an important effect on pulmonary hemodynamics and has to be taken into account when predicting its behavior....
An Elastoviscoplastic Model for High Strength Concrete
An elastoviscoplastic model of overstress type is proposed for high-strength concrete in this study. With its viscosity parameters determined with experimental data from the split-Hopkinson-pressure-bar...
Fiber Suppressed Localization in Tension
Tensile fracture in portland cement based fiber composites is studied. Formation and propagation of stable microcracks is examined by means of holographic interferometry. Distributed microcracking...
A Discussion of the Numerical Modeling of Sea Ice Ridging
Pressure ridging, is the failure mechanism of the Arctic pack ice in compression. The large-scale compressive strength of the ice pack is determined by the aggregate of ridge building...
Nonlinear Eigensolver for Exact Vibration Analysis
Vibration analysis of structural systems is concerned with accurately predicting the free vibration modes and frequencies of the vibrating system. This analysis process involves two general...
An Expert System for Impeller Mechanical Design and Analysis
Impeller is the most critical component of centrifugal compressors. The mechanical efficiency and durability of the impeller determines the performance of the compressors. The shapes and...
Numerical Simulations of Diastolic Flow Patterns in a Model Left Ventricle with Varying Degrees of Mitral Stenosis
Blood flow patterns in the left ventricle are undoubtedly influenced by the physical and mechanical state of the natural mitral valve apparatus or the geometry of an artifical valve replacement....
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
Investigation of Parametrically-Induced Excitation in Concrete Columns
A mathematical model is developed which accounts for the non-linear material characteristic of concrete members. The axial and transverse motions of concrete columns, are found to be second-order...
Macromodeling of Complex Composites
Dimensionally reduced p-version finite elements based on higher order theory are developed for modeling laminated composite plates and shells in the presence of cracks, notches, and delaminations....
Experimental, Physical and Numerical Modeling of Lunar Regolith and Lunar Regolith Structures
An extensive series of laboratory strength and deformation experiments have been performed on a lunar regloith simulant. Results of these experiments are compared to results from experiments...
Enhancing Decision Analysis Techniques for Lunar Base Construction Research
The usefulness of decision analysis concepts applied to lunar base construction research has been demonstrated [Boles 1990]. During the referenced work the authors realized that further...
Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....
Analysis of Two Lunar Oxygen Production Processes
Frequently, chemical engineers must evaluate processes, design systems, and size equipment based on a chemical or physical reaction without the benefit of laboratory data or previous industrial...
Return to search