Riprap Stability on Channel Slide Slopes
The stability of riprap placed on a sloping bank is decreased because one component of gravity tends to displace the rock down the slope. Results of riprap stability tests on sloping banks...
Estimating Average Velocity in Cobble-Bed Channels
A data set obtained from natural channels having D//5//0 less than 64 mm and d/D//5//0 in the range of 3 to 20 is used as a basis for testing equations proposed by Limerinos, Thompson...
Pressure Fluctuations on the Floow of Hydraulic Jumps
This paper presents the results of an experimental investigation regarding the variation of r. m. s. value of pressure fluctuations on the floor of free and forced hydraulic jumps formed...
Plume Underflow Interaction in Natural Enclosures
A preliminary investigation into the feasibility of using a hot-water plume to intercept and entrain a cold underflow is presented. The investigation involved an adaptation of existing...
Open Channel Flow Resistance in Horseshoe Conduits
An experimental study of open channel flow resistance in horseshoe-shaped conduits is reported. The friction factor is shown to increase approximately 20 percent in comparison to values...
Experiments on Culvert Flow
Laboratory experiments are described which were performed on small-scale models of smooth circular culverts of length-to-diameter ratio varying between 13 and 52, and longitudinal downward...
Flume Measures Ultra-Wide Discharge Range
Advances in mathematical modeling in the mid-1970's have led to accurate modeling of discharge and energy loss characteristics of long-throated flumes. A complex long-throated...
On the Definition of Fluid Mud
Fluid mud is a near-bed, high density cohesive sediment suspension layer which is a common cause of estuarial and nearshore sedimentation. It is noted that for a given sediment-fluid mixture,...
Laboratory Study of Mud Flows
In the study reported depth profiles and tip velocities were measured for a series of unsteady mud flows generated in a laboratory flume using a dam break scenario. Observation of a wide...
Flow Around Islands in Rupert Bay: An Investigation of the Bed Friction Effect
Aerial photographs of transverse shear flows around islands in Rupert Bay, a shallow and turbid estuary in northern Quebec, were studied for effect of bed friction. The island wake depends...
Local Scour Under Waves Oblique to Current
Local scour around a cylindrical pile subjected to waves oblique to current was experimentally studied in a laboratory flume with a wave generator. The mode of wave-current interaction...
Imbrication of Tabular Boulders
Analysis of moments on tabular boulders projecting into a uniform stream indicates that a tabular boulder dipping downstream is unstable and can be overturned by velocities expected during...
Techniques for Measuring Flow and Sediment Parameters Near the Bed in Estuaries
The collection of accurate and meaningful field data is often the key to successful description and prediction of natural processes. The U. S. Army Engineer Waterways Experiment Station...
Update: Fluidization for Tidal Channel Maintenance
Flow emanating from perforations in a pipe under a non-cohesive media, such as sand in the coastal environment, can fluidize the overlying media. The fluidized sand can be readily moved...
Nonhomogeneous Terms in the Unsteady Flow Equations: Modeling Aspects
A study is in progress to identify the relative significance, effects, and benefits attributable to the use of one-dimensional, unsteady, open-channel, flow-simulation models employing...
Coupled Implicit Simulation of Mobile-Bed Rivers
Numerical and physical deficiencies in existing computational codes for simulation of bed evolution in mobile-bed rivers have led the authors to propose a new approach. The new method...
Polyhedric Surfaces
A new design for spillways is proposed. The basic idea is to substitute the traditional shape of the continuous vertical bends by polygonal plane surfaces. In this way it is possible to...
Model Study to Locate Aerators in Tunnel Spillways
A model study to locate, in an optimum way, aerators in tunnel spillways is presented. A Froude half model, scale 1:30, was used. The flow geometry, the air discharge sucked by the aerators...
Applications of the Singular Point Method to Hydraulic Analysis of Spillways
A computer-oriented procedure is described to develop rating tables for side channel spillways. The procedure includes three sets of computations which have to be performed iteratively...
Minimum Energy Loss and Velocity Profiles in Pipes
Minimum energy loss in a flow is discussed. The concept is applied to derive velocity distributions for laminar flow through a circular pipe and steady uniform turbulent flow through a...
Return to search