ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Probabilistic Analysis of the Ghonem and Dore Data
A two-state Markov process model for fatigue crack growth is utilized with experimental fatigue crack growth data reported by H. Ghonem and S. Dore to study the effect of stress ratio...

Diffusion Models of Fatigue Crack Growth with Sequence Effects Due to Stationary Random Loads
A new fatigue crack growth model that includes load sequence effects is formulated. This model includes a load history dependent parameter, the reset stress, which reflects the state of...

Analysis of Fatigue Crack Propagation Under Random Loading by Markov Chain
Fatigue crack propagation is simulated in terms of a discrete Markov process considering both the randomness of crack propagation resistance and the randomness of external loading, which...

Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...

Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...

Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...

Damage Process of Composite Material with Randomly Oriented Fibers
A numerical procedure is formulated to make clear the damage process of composite materials with randomly oriented fibers. These composites often have complicated fiber oriented states,...

Fatigue Design and Reliability Analysis of CFRP Composites
The statistical fatigue properties of unidirectional (UD) T800/3631 carbon/epoxy composite laminates are investigated in this paper. Fatigue tests were conducted under rotating bending....

Fatigue Test Using Multi-Notched Specimen and its Reliability Analysis
This paper presents a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by a small number...

Adaptive Reliability-Based Inspection Strategies for Structures Subject to Fatigue
Metallic structures subject to substantial load-induced fatigue must be inspected from time to time and, possibly, repaired or even put out of service if the damage has reached critical...

Objective Comparison of Fatigue Crack Growth Laws
This paper presents objective criteria for choosing between different fatigue crack growth laws to represent a material's fatigue behavior based on a data set containing multiple...

Fatigue Crack Closure Under Random Loading
The goals of the research are to determine fatigue crack growth rates for stationary random amplitude loadings with arbitrary mean stress. Fatigue crack closure theory is applied to justify...

An Investigation of Live Loads on Concrete Structures During Construction
Slab formwork live loads include the weight of equipment, construction material storage loads, and impact loads when placing the concrete. In this paper material and equipment loads are...

Probabilistic Approach to Stress Distributions for Orthotropic Wood Plates
Probabilistic approach to the stress distributions of an orthotropic wood plate is discussed. The stress distributions for the orthotropic elastic media are fully dependent of the material...

General European Principles of Codes Concerning Reliability
The requirements for reliability cover safety, serviceability and durability and consider different causes and types of failure. They may concern the occurrence of a failure or the duration...

Background Studies for the Determination of Strength Functions in Eurocode 3?Design Rules for Steel-Structures
At present common unified rules for the design of Civil engineering structures are being prepared on the initiative of the Commission of the European Communities. Eurcode 3, which gives...

Limit States Design in Masonry
This paper reviews some aspects of limit states design for masonry structures based primarily on experience with a new Canadian code. Steps in an advanced second order safety index analysis...

Reliability of Miter Gates
A new approach for the reliability calculation of miter gates is presented. The reliability and hazard functions are related to the surficial wear of miter gates on their horizontal sill....

Reliability Models of the Mohr Failure Criterion for Mass Concrete
Failure in biaxially stressed concrete is here modelled by the Mohr criterion. The reliability of a stress state is evaluated in terms of 2 load variables and 1 or 2 strength variables....

Reliability Synthesis of CFRP Laminated Plate
The paper presents a formulation of shift synthesis to improve the reliability of fiber reinforced plastic (FRP) laminated plates with uncertain elastic constants and lamina strength....

 

 

 

 

Return to search