A DEM Based Hydrologic and Sediment Transport Model
A DEM-based, physically-distributed model was developed for simulating event runoff and erosion on an agricultural watershed. Runoff was described using the diffusion equation with flow...
Modeling 3D Free Surface Flow in Compound Channels: A Validation Case Study
This paper presents the results of a validation study of a free-surface flow model. For the validation, experimental data collected in a compound open channel is used. This validation...
A System Approach for Identifying and Improving Hydraulic Numerical Modeling Reliability
A system response approach which uses Fourier transform through a multiple-input/ single-output (MISO) nonlinear system to evaluate the model performance of verification and simulation...
Groundwater Flow Component of a Wetland-Dynamics Model
A 3-D groundwater flow model was developed to study the hydrology of groundwater-fed wetlands. Initial model results, including steady and unsteady simulations, compare well with existing...
Distributions of Return Flow in Navigable Waterways
Physical impacts of barge traffic on the riverine environment have drawn increasing attention from resource managers of the Upper Mississippi River System (UMRS). Return flow, which can...
Two-Dimensional Modeling of River Dynamics for the Expansion of Clover Island, Kennewick, Washington
The Port of Kennewick, Washington, is proposing to redevelop Clover Island as a waterfront village concept. The island is located in the Columbia River between McNary and Priest Rapids...
Improving the Speed of Double Lockages
The size of tug and barge combinations on the Upper Mississippi River and Illinois Waterway frequently exceed the dimensions of the lock chambers they must pass through. The locks on these...
Automated Tools for Spatially Distributed Rainfall/Runoff Modeling
A watershed modeling system (WMS) has been developed to address the needs of surface water rainfall/runoff computer simulations. WMS, developed at the Engineering Computer Graphics Laboratory...
Impact of Reservoir Flood-Control Operation on Interior-Drainage Facilities
Sacramento, CA is protected from floods of the American River by Folsom Dam and a system of levees. Proposed modifications to the flood-control operation of Folsom will increase downstream...
A New Model of California's SWP/CVP Systems
A water allocation reservoir simulation model is combined with a ground water-surface water simulation model resulting in an integrated model for use in water resource planning studies...
Risk Analysis of Joint Reservoir Operation in Central Taiwan
Risk analysis for shortage of water on the joint operation of Li-Yu-Tan Reservoir and Shih-Kang Dam (Reservoir) in central Taiwan is presented in this paper. Deter ministic simulation,...
Development of a Hydrologic Model with Both Spatially Distributed and Physically Based Capabilities
A distributed hydrologic model is developed at The Pennsylvania State University for use with rasterized data bases. The purpose of the Terrestrial Hydrologic Model or THM is to investigate...
Field Verification of Dem-Derived Watershed Response
Rainfall-runoff data from an NAEW Experimental Watershed are used to test the feasibility of deriving the watershed response from the digital elevation model of the watershed. Using Clark's...
Mixing Processes in the Dangava River Estuary
The aim of this report is to present main changes in the hydrology of the Daugava River estuary after its natural water flow became regulated and to present a simple physical model of...
Simulation of Catchment Response Using RC Network
This paper describes a simple physically-based distributed parameter hydrologic model of catchment response using a network of capacitors and resistors. The effect of topography is modeled...
SAMS: Software for Simulating Streamflow Series
This paper introduces SAMS, a computer software developed for the analysis, modeling, and generation of hydrologic time series such as annual and monthly streamfiows. It is written in...
Impacts of Climate Change in the Missouri River Basin
The Soil and Water Assessment Tool (SWAT) is being used as a base model to simulate the Missouri River basin for prediction of the impacts of climate change on water resources in the region....
Preliminary Validation of the MAC3D Numerical Flow Model
MAC3D is a recently developed numerical model for three-dimensional incompressible flow. Model predictions are compared with physical test data for a curved open channel and a multi-level...
3D Flow Structures?From Laboratory to Field Applications
One laboratory experiment and one field application have been modeled. For each one different sources of errors in the model results could be detected. It may be concluded that the applicability...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Return to search