The Taller the Deeper (Available only in the Geo/Environmental Special Issue)
While debate rages on about which structure holds the title of the world's tallest building, there is no dispute over which building has the deepest foundation. At 130 m below...
Design of Sheet Pile Walls
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 15 From foundation exploration and testing procedures...
Touchdown for O-Cell Test
The Los Angeles Memorial Coliseum was badly damaged by the Northridge earthquake. There was seven months to complete 3 years of work to be ready in time for football season. The project...
The Science of Water
The Foundation of Modern Hydraulics
Geoenvironment 2000
Characterization, Containment, Remediation, and Performance in Environmental Geotechnics
The impact of rapid industrialization around the globe and unsafe waste management practices have become increasingly significant within the last two decades as the disclosed number of...
Bridge Design: Reality Bites Back
Many bridge engineers tend to ignore the process nature of reality, the fact that everything in this universe changes from moment to moment. When they are given the responsibility for...
Earthquake-Induced Movements and Seismic Remediation of Existing Foundations and Abutments
This proceedings,
Failures in Civil Engineering
Structural, Foundation and Geoenvironmental Case Studies
This special publication consists of a collection of short descriptions of failures case studies in Civil Engineering. The descriptions cover cases in structural, foundation and geoenvironmental...
Performance of Deep Foundations Under Seismic Loading
This proceedings,
So Your Home Is Built on Expansive Soils
Prepared by the Shallow Foundations Committee of the Geotechnical Division of ASCE. This report assists homeowners in understanding why expansive soils...
The Foundation for a New Approach to Implement Building Innovation
Prepared by the Partnership for Building Innovation project, which is sponsored by CERF; National Institute of Standards and Technology; U.S. Department of Housing and Urban Development;...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Coupling Translation and Rocking Motions
In the design of concrete block foundations for rotating and reciprocating machines, it is important to avoid resonant conditions. Therefore, accurate determination of the frequencies...
Monitoring of Structures During Repair of Underground Utilities
A collapse of underground utilities at a power plant required the constant monitoring of the surrounding structures during excavation and replacement of the damaged pipes. A computer-based...
Case Study - Performance of Diaphragm Walls During Construction; Predictions vs. Field Measurements
Rigid diaphragm walls (slurry walls) are being used more than any other earth supporting system for underground construction projects in confined downtown sites throughout the United States...
Seismic Evaluation of the Tied-arch Bridge Across the Mississippi River on I-40
The bridge reported in this paper is a two-span steel tied-arch bridge supported on massive caisson foundations. Site specific seismic studies were carried out to establish the ground...
Site Effects on Strong Shaking and Seismic Risk: Recent Developments and Their Impact on Seismic Design Codes and Practice
The very strong influence of localized poor or 'adverse' geological/geotechnical foundation conditions on patterns and concentrations of damage during a number of recent earthquakes (e.g.:...
Guide for the Design of Prestressed Concrete Poles
With the aim of providing engineers with some basic tools and guidelines for the design of structures, the committee prepares code and policy changes, and to expand input of manufacturers...
Overview - Electrical Substation Structures Design Guide
The ASCE Substation Structures subcommittee of the Committee on Electrical Transmission Structures (CETS) is developing a substation structures design guide. The guide discusses the analysis...
SDC Detector Foundation Requirements for the SSC
The Solenoidal Detector Collaboration (SDC) detector weighs approximately 32,000 metric tons, and its ability to perform to design specifications is directly related to its internal alignment....
Return to search