Boston's Backup Water Supply
For fifty years, Boston's sole real source of water has been the Hultman Aqueduct, but now final design is almost complete on the MetroWest Supply Tunnel, a new, larger conduit...
An Experimental and Analytical Study of the Shoreline Response to Non-Parallel Breakwaters in Oblique Waves
REsults of an experimental and analysis study single breakwaters on oblique waves are presented. Three orientations of the breakwaters are studied, those being parallel to the shoreline,...
Wave Run-Up and Reflection on a Permeable Sea Wall
The swash oscillation on a sloping seawall made of step-shaped concrete blocks, waves and water particle velocity in front of the seawall were measured. It was inferred that incident waves...
Design Waves and Wave Spectra for Engineering Applications
Thirteen years of hourly wave data measured at two of the National Data Buoy Center's (NDBC) buoy stations, one located in the northeastern Pacific and the other located in the northwestern...
Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...
The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...
Airport Terminal Design Challenges
In February 1989, the Metropolitan Washington Airports Authority began the process of designing and constructing a new terminal at Washington National Airport to address the needs of its...
Dynamic Loading of Airfield Pavements Caused by Aircraft Operations on Rough Runways
This paper presents results for dynamic pavement loading of various aircraft under takeoff and taxing scenarios. The data were obtained from computer simulation and applied to the Corps...
Implementation of Elastic Layered Theory for Design of Unbonded Overlays
The U.S. Army and Air Force have implemented the elastic layered theory for design of unbonded overlays for rigid airfield pavements. The procedure allows for design of unbonded overlays...
Nighttime Cement Concrete Pavement Replacement Seattle-Tacoma International Airport
Several airfield improvement projects are currently underway at Seattle-Tacoma International Airport (Sea-Tac), many of which are being constructed using cement concrete pavement. Due...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Classification of Problem Types
Design and operation of hydraulic systems can be an extremely complex task. Although not widely accepted the application of deterministic optimization techniques can provide guidance to...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Integration of Water Quantity and Quality Planning
This paper describes the integration of water quantity and quality objectives within the framework of a computerized interface design to assist with the difficult process of long-range...
Considering Uncertainties in Water Resource Designs
Design of water resource systems often faces with various uncertainties. The nature of problems in essence are decision making under uncertainties. This paper offers an introduction to...
Reliability Analysis of a Multi-Reservoir Water Distribution System
A methodology for evaluating system reliability is developed to assist in the planning and management of a multi-reservoir water distribution system. The minimum cut-set approach is employed...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
Engineering, Construction, and Operations in Space IV
This proceedings,
CAD for Small Hydro Projects
The quest to reduce design costs and improve design quality by raising productivity is familiar to every manager and designer. This article examines how CAD can play a role by examining...
Return to search