Reliability Analysis of Offshore Structures Using the Virtual Distortion Method
This paper describes a new and efficient methodology for structural reliability analysis applicable to offshore jacket structures. The proposed methodology uses the Virtual Distortion...
Progressive Failure Probability of Soil Slopes Containing Geologic Anomalies
The variability in the redistribution of stress during sliding failure of a slope is first studied. Presence of a geologic anomaly is shown to affect the failure path pattern and likelihood...
Autocorrelation Functions for Offshore Geotechnical Data
Autocorrelation functions are described. Data from several North Sea sites are analyzed with respect to the vertical and horizontal autocorrelation of a number of soil properties. Based...
Bayesian Updating of Axial Capacity of Single Pile
The paper outlines a Bayesian technique to update predictions of pile driving and axial pile capacity on the basis of pile driving records. The approach enables one to systematically account...
Seismic Hazard Estimation in the Eastern U.S.
Probable seismic hazard is generally estimated considering five elements: 1) seismicity; 2) source radiation; 3) wave propagation (attenuation); 4) site response; and 5) ground failure....
Development of Fragility Curves for Liquefaction
The purpose of this study is to propose a methodology for evaluation of the degree of liquefaction potential and to demonstrate its applicability in constructing fragility curves for liquefaction...
Response Analysis of Crude Oil Transmission Systems
A preliminary analysis of the seismic response of continuous steel pipelines is presented. The Crude Oil Transmission System in the New Madrid Mo. area is choosen as an example. Assumptions...
Identification of a Site-Specific Ground Motion Model
The power spectral density and envelope function of earthquake ground accelerations at a site of interest are determined with the aid of system identification based on information predicted...
Analysis of Earthquake Response at a Site With Uncertain Properties
The problem of earthquake response of a soil deposit with uncertain properties is studied in the paper. Various analysis procedures for handling the dynamic response of an uncertain system...
Reliability of Redundant Structures Under Time Varying Loads
Time-variant system reliability methods under Poisson pulse load processes are presented. Direct simulations based on incremental truss analyses are also performed. Small displacement...
Probabilistic Analysis of Soil Structures Using Finite Element Method
The authors have developed general-purpose stochastic finite element analysis system, which supports various types of correlation and computes safety index ? by first-order second-moment...
Stochastic Finite Element Analysis for Spatial Variations of Soil Properties Using Kriging Technique
When a reliability analysis for geotechnical problems is performed based on the stochastic finite element method, a proper estimation of spatial variation of soil properties is important...
Reliability-Based Analysis of Shallow Foundations
The effects of different parameters on the reliability of shallow foundations are examined. It is found that the footing depth, the footing length, and the load ratio have almost no effect...
Downtown in Soft Ground
Critchfield and MacDonald describe the shield excavation of twin bus tunnels 21.25 ft in diameter and 5,000 ft long as part of the Downtown Seattle Transit Project. This $450 million project,...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Stress Relaxation Characteristics of the HDPE Pipe-Soil System
All piping materials and soils are subject to viscoelastic behavior such as stress relaxation and creep. The combination of soil and pipe viscoelastic properties determine the time-dependent...
Corrosion Protection of Cast Iron and Ductile Iron Pipe, San Diego, California
This paper addresses the use of a loose unbonded plastic covering polyethylene encasement for protection of cast and ductile iron pipe in an extremely corrosive soil. The case study in...
Return to search