Comparisons of Full Scale and Wind Tunnel Model Response to Wind of Long Span Bridges
There are several vital reasons for measuring the response of full scale structures to wind and comparing the results to models - both experimental and analytical - employed in design....
Aluminum Orthotropic Bridge Deck Verification
This paper reports tests conducted to evaluate an aluminum orthotropic deck. Approximately 60 welded T-joints with 6061-T6 stems and 5456-H321 plate were subjected to flexural fatigue...
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
Fatigue Strength of Welded Wire Fabric
Long life fatigue tests were made on 12 concrete slabs reinforced with large diameter, Grade 75, deformed welded wire fabric. The specimens simulated, to full scale, conditions in a bare...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Role of Microcompiuters in Highway Weigh-in-Motion Systems
Microcomputer technology makes it possible to digitize the signals, calculate the desired factors, and record and display the information in real time at the weigh-in-motion (WIM) site....
Microcomputer Assisted Bridge Rating
Before microcomputers can be useful to those officials responsible for rating the approximately 576,000 bridges in this country, software systems must be developed to analyze and rate...
Bridges and Transmission Line Structures
This volume on Bridges and Transmission Line Structures contains papers from ten sessions and one plenary session of the 1987 ASCE Structures Congress. Eight sessions cover bridges. A...
Earthquakes Will Not Damage This Bridge
A California pipeline bridge has been retrofitted with isolation bearings that damp earthquake shocks. The bridge over Southern California's Santa Ana River carries the Upper...
Connecticut: A Success Story
The Connecticut Department of Transportation (ConnDOT) had warned the state legislature that its highways and bridges would continue to deteriorate without increased funds for inspection,...
The Wet Look
The collapse of the Schoharie Creek bridge drew attention to underwater inspection. Underwater inspection of bridges gives engineers a better understanding of the condition of the bridges....
The Just-in-Case Factor
Computer analysis allows bridge designers to take a more precise look at the old structural principle of redundancy. No one can define redundancy, but everybody knows what it means. Two...
Twisting in the Wind
Wind tunnel tests are being used increasingly to test the aerodynamic stability of bridges. Many designers think these tests should be used early in the conceptual design stage, rather...
Wind Loading and Wind-Induced Structural Response
A State-of-the-Art Report
This state-of-the-art report presents fundamental and practical aspects of modern wind engineering practice as it relates to structural design. The first chapter includes information on...
Surveying for Scour
The public works engineer never knows exactly how many bridge piers and abutments are undermined by erosion due to scour. Massachusetts Department of Public Works needed a rapid method...
Long Term Performance of the Goldstream Creek Bridge
In 1964 the Alaska Department of Transportation and the U. S. Army Cold Regions Research and Engineering Laboratory initiated a cooperative study which in the long-term generated a significant...
Microcomputer Program for Bridge Analysis & Rating
The microcomputer software system, BRCOM, for the analysis and rating of bridge superstructures is described. The system consists of ten programs written in UCSD P-System FORTRAN, which...
Interactive Analysis and Design Program for Girder Bridges
An interactive microcomputer program for the analysis, design, and rating of girder bridges is presented. The program, GBRIDGE, is user-friendly, menu-driven, and developed in modular...
Optimal Design of Continuous Prestressed Concrete Girders
Design of continuous prestressed concrete girders with possibility of parabolically varying depth in each span is formulated in the form of a mathematical programming problem. The design...
A Microcomputer CAD System for Seismic Design of Regular Highway Bridges
A microcomputer program to implement the recent seismic design guidelines for highway bridges is described. The methodology was developed by the Applied Technology Council (ATC) and is...
Return to search