Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...
Application of TOPNET in the Distributed Model Intercomparison Project (DMIP)
This paper describes the application of a networked version of TOPMODEL, TOPNET, as part of the Distributed Model Intercomparison Project, DMIP. The model implementation is based on a...
Rate of Under-Registration Due to Failures of Large Meters
Leaks and meter under registrations are suspected as primary components of unaccounted-for water in Korea. In 2001, national unaccounted-for-water rate is reported as 26.6%. More than...
Calibration of Water-Velocity Meters
The U.S. Geological Survey (USGS), as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration of water-velocity...
Use of Economic Optimization to Assess the Value of Water Marketing
(No paper) There is an increasing interest and implementation of water markets as an allocation mechanism for water in the Western U.S. However, the importance of the timing and location...
Distributed Parameter Hydrologic Modeling and NEXRAD for River Forecasting: Scale Issues Facing the National Weather Service
With the advent of NEXRAD (Next Generation RADar), the National Weather Service has the opportunity to move from current lumped parameter modeling to more of a distributed parameter hydrologic...
Calibration of Sediment Transport Model for the Upper End of Elephant Butte Reservoir
Elephant Butte Reservoir is located about 125 miles north of El Paso, Texas on the Rio Grande. The reservoir is approximately 35 miles long with a narrow neck, called the Narrows, about...
Impacts of Climate Change in the Missouri River Basin
The Soil and Water Assessment Tool (SWAT) is being used as a base model to simulate the Missouri River basin for prediction of the impacts of climate change on water resources in the region....
Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...
Calibration of a Water Quality Model Using the Influence Coefficient Algorithm
A methodology based on the influence coefficient algorithm was established for the calibration of QUAL2E reaction coefficients. It was applied to the stream sections of the South Han River...
Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...
Calibration of Movable Bed Model for Armant Area
The morphology of the Nile River, in Egypt, is undergoing continuous changes which causes navigation bottle-necks in some local reaches. About 200 km downstream Aswan, at Armant area,...
Developing Air Concentration and Velocity Probes for Measuring Highly-Aerated, High-Velocity Flow
The U.S. Bureau of Reclamation's stepped spillway overtopping protection research program required velocity and air concentration profile data be obtained during testing in a large, 15.2-m-high...
Measuring Air Concentration in Flowing Air-Water Mixtures
This paper describes the use of an electrical conductivity probe to determine aeration of a plunge pool by an overfall nappe. The probe was calibrated using an apparatus designed to provide...
A Computer-Controlled, Precision Pressure Standard
The operating principles as well as the technical aspects of the implementation of a precision pressure standard are presented here. The instrument can have dual use: either as a pressure...
A Calibration Process for Automatic Incident Detection Algorithms
This paper describes the development of a general method for the calibration of Automatic Incident Detection algorithms. A simple structure of freeway traffic data adapted to this process...
Automatic Calibration of 3D Finite Differences Model Parameters? Application to the Finnsjon Site (Sweden)
Calibration of 3D finite difference model parameters is usually carried out using a noon-automatic 'manual' procedure until observed heads, for instance, are simulated with a sufficient...
Experimental Studies to Calibrate Unsaturated Flow Models
Work is described that has been designed to serve as a laboratory calibration of numerical models for unsaturated flow studies. The experiment size is configured large enough that the...
Lower Missouri River Water Quality Model for Evaluating Flow Alterations
A modified version of the US Environmental Protection Agency's (USEPA) one-dimensional (longitudinal) stream water quality model, QUAL2E, was applied to the lower Missouri River to evaluate...
Mean Areal Precipitation Estimation Using Radar
The accuracy of mean areal total storm precipitation (MAP) over small urban basins (30-100 km2) in the Denver, CO metro region was examined using...
Return to search