Curvature Effects on the Deflection and Vibration of Cross-Ply Shallow Shells
The use of high performance materials is becoming increasingly significant in structures subjected to severe loading conditions. Effects of curvature on the stiffness characteristics of...
Synthesis of Lateral Structural Bracing with Active Tendons
The idea of combining X bracing, viscoelastic dampers, and active tendons in a structure which has been optimized for gravity loads is presented. It is shown that reduction of the structure's...
Chaotic Analysis of Dynamic Bifurcation of Viscoelastic Shallow Arches
Periodic and chaotic motions in a mathematical model of an imperfect, viscoelastic shallow arch under a dynamic sinusoidal load for both the symmetric and the coupled unsymmetric responses...
Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...
Elastic Stability of Non-Rectangular Plates
Non-rectangular plates may have infinite number of geometric configurations. Idealized pattern of practical shapes is chosen to be a sample for these plates. The present paper is concerned...
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...
Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Postbuckling Analysis of Composite Stiffeners under Uniaxial Compression
This paper presents an analytical and experimental study conducted for postbuckling of I-section stiffeners. A stability analysis was carried out to determine postbuckling response of...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
On Statistical Micromechanical Process Damage Models for Brittle Solids with Interacting Microcracks
Two-dimensional micromechanical damage models with strongly interacting microcracks are presented to investigate the overall nonlinear mechanical responses of microcrack-weakened brittle...
Crack Growth Stability in Ice
The mechanics of stable, time dependent crack growth as a function of geometry and increasing crack length in saline an freshwater columnar ice are examined in this paper. Experimental...
Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...
Numerical Undrained Cyclic Loading Simulations Using the Discrete Element Method
Three dimensional numerical experiments on random arrays of rough spheres were performed using the discrete element method to study the behavior of granular soil and the results were compared...
Return to search