Geostatistics in Groundwater Sampling Design
The geostatistical methods of kriging and co-kriging are compared as tools for the design of an optimal groundwater monitoring network. First, the network is optimized using single-variable...
In-Vitro Measurement of Static Contact Pressure Distribution in Synovial Joints
The objective of this presentation is, at first, to review the various approaches to the measurement of contact pressure distribution in synovial joints, and then to describe the development...
Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
Hurricane Retrofit
Houston's Sheraton Hotel and Convention Center has been retrofitted to protect it from panel pop-out (separation from building curtain walls) and curtain-wall separation from...
Watertight and Earthquake Resistant Joints for Diaphragm Walls
Different types of joints were constructed and tested in the field to evaluate the bond between concrete and partition plate, the effect of tremie pipe location to the quality of concrete...
How Has the Joint Review Process Evolved?
The Joint Review Panel (JRP) process in California was established for offshore oil and gas-related coastal development projects to avoid duplication of effort among various permitting...
The States/British Columbia Oil Spill Task Force
The States/British Columbia Oil Spill Task Force, consisting of government representatives from Washington, British Columbia, Alaska, Oregon, and California, formed in 1989 in response...
Jointless Redecking
If you're redecking a bridge, why not eliminate a major cause of its corrosion at the same time? Why not remove the expansion joints? The Department of Public Works in Steuben...
Flawed Assumptions: Why Bridge Deck Joints Fail
Engineers should continually examine, evaluate and improve their representations of reality to avoid basing their beliefs, decisions, practices and policies on flawed assumptions. Such...
Response of Ductile Iron Pipelines at Parkfield, CA to Loma Prieta Earthquake
A field experiment designed to investigate the performance of buried pipelines at a fault crossing has been constructed at Owens' Pasture near Parkfield, CA. The site was...
Seismic Behavior of Buried Pipelines Through Field Observation
This paper presents seismic response characteristics of embedded pipes based on field measurements. Strains induced in steel pipe and ductile pipes with expansion joints are studied. Special...
Prediction of Seismic Damage to Water Supply Network
In this paper a method for predicting seismic damage to water supply network is presented. By taking the breakage of the joints of the pipeline caused by seismic wave propagating as main...
Restrained Underground Piping?Some Practical Aspects of Analysis and Design
This paper is a brief update of stress analysis techniques published earlier [1] to aid the analyst in qualifying continuous welded steel buried pipelines that are subject to seismic soil...
Finite Element Analysis of Three-Way Joint of Buried Pipelines Under Earthquake Loads
A quasi-static finite element procedure for the stress analysis of three-way joint of buried pipelines under earthquake loads has been established by quasi-conforming thin circular cylindrical...
Seismic Response of Buried Pipeline System in a Soil Liquefaction Environment
A project to study the general seismic response behavior of buried pipeline systems during a soil liquefaction process has been initiated at Old Dominion University. Pipeline systems could...
Joint Spacing for Airfield Pavement
This paper looks at various factors affecting portland cement concrete(PCC) pavement cracking, with special emphasis on the effect of joint spacing on crack development. A rational approach...
Pavement Experiences Indicative of Needs to Consider Design and Specification Revisions
Recent experiences on two airfield paving projects have indicated some problem areas which may warrant further consideration in design manuals and specifications. 1. Construction of the...
Reliability-Based Design of Tunnel Support in Jointed Rock
The presence of joints in a rock mass may cause local instability of the tunnel support and its effect on safety should be included in design. Because of significant uncertainties in the...
Seismic Response and Vulnerability of Water Delivery Systems
The response and vulnerability of straight segmented buried pipelines subject to seismic wave propagation are investigated in this paper. Seismic damage to buried pipelines is briefly...
Return to search