Engineering Mechanics
This proceedings contains keynote and summary papers presented at the 11th ASCE Engineering Mechanics Conference held in Fort Lauderdale, Florida, May 20-22, 1996. The keynote papers address...
Sound Way to Save Fish
Fish protection need not cost an arm and a fin. Using light and sound to spare fragile blueback herring and other species a harrowing fate, the U.S. Army Corps of Engineers devised a fish...
Materials for the New Millennium
This proceedings,
The Northridge Fractures: Are We Learning the Right Lessons?
After the Northridge earthquake in January 1994, engineers found problems with special moment-resisting frames. There were multiple facture modes, and typical damage involved primary crack...
Northridge Postscript: Lesson on Steel Connections
Immediately after the Northridge earthquake in January 1994, the general concensus was that steel-framed buildings performed extremely well. Later, inspectors were surprised to find weld...
Engineering Mechanics
This proceedings,
Demolishing NAPLs
Dynamic Underground Stripping is a combination of
Soil Suction Applications in Geotechnical Engineering Practice
This proceedings,
Human Extender: A Material Handling System
A human's ability to perform physical tasks is limited by physical strength, not by intelligence. `Extenders' are a class of robot manipulators worn by humans to augment human mechanical...
On the Dynamics and Control of Flexible Orbiting Systems: An Approach with Application
A relatively general formulation for studying the dynamics and control of an arbitrary spacecraft, with interconnected flexible, deployable and articulating structural members, is reviewed...
Improving Dynamic Finite Element Models Using Test Data
A structural optimization based method was developed to improve the finite element model to achieve good agreement with the test results. The modal displacements at critical locations...
Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...
Mechanics of Curved Fiber Bundles in Composites
Fiber undulations are inherent to manufacturing processes like braiding and filament-winding, and sometimes occur as defects in other composite structures. This paper summarizes the status...
Hygrothermal Effects in Composite Sandwich Panels
The macromechanical analysis of a composite panel with laminate facings and a honeycomb core is carried out by taking into account mechanical and hygrothermal loads. In this analysis the...
Reservoir Estimates for the Sulpicius Gallus Region
Estimates presented here show that 1.1?109 metric tons of oxygen could of produced from one of the enriched areas that have been detected by spectrographic...
A Multimedia Learning Environment for Statics
A multimedia learning environment (MLE) is being developed in the area of statics within the framework of SUCCEED's Curriculum 21. An overview is presented which includes: discussions...
Lateral Buckling: A Comparison of AISC-LRFD and Eurocode 3
The nominal moment capacity of laterally unsupported, doubly-symmetric, steel I-beams are computed and compared using the AISC-LRFD and EC 3 design recommendations. A review of the EC...
Statistical Response of a Class of Hysteretic Systems
The response of a hysteretic nonlinear system subjected to a filtered white noise is considered. The method of time-dependent equivalent linearization is used and the moment equations...
ATLSS Connections with Moment Capacity
ATLSS Connections are a family of beam-to-column connections which utilize the self-aligning feature of a specially designed connector and are developed for possible use in an automated...
The Challenge of Housing the Largest Detector
The most innovative part of the structural-civil design of the Superconducting Super Collider (SSC) is that of the underground experimental halls located alongside the 86 kilometer collider...
Return to search