Simple Water Measuring Device for On Farm Irrigation Evaluation
Laboratory experiments were conducted for the calibration of three flumes of different sizes. The logarithmic transformation in linear regression yielded excellent results for the stage-discharge...
Calibration of Tensiometers and Gypsum Blocks Using Soil Moisture Content
The common tensiometer and gypsum block used for irrigation scheduling are evaluated using gravimetric soil moisture measurements. The results indicate several difficulties with the tensiometer...
A Hydrologic Model for Designing Border Irrigation
A hydrologic model was developed and evaluated using experimental data from two irrigation tests. First, the model was calibrated using the experimental data of one irrigation test, after-that...
Synthetic Calibration of a Rainfall-Runoff Model
A method for synthetically calibrating storm-mode parameters for the U.S. Geological Survey's Precipitation-Runoff Modeling System is described. Synthetic calibration is accomplished...
Limitation to Standard Parshall Flume Calibrations
Parshall flumes are widely used for metering open channel flows. An inspection of the original study which developed the rating equations indicates that the flumes were not tested for...
Prediction of Overland Phosphorus Transport Using a Phosphorus Enrichment Ratio
The Guelph model to evaluate the effects of Agricultural Management Systems on Erosion, Sedimentation, and Phosphorus yield (GAMESP) of Rousseau et al. was used to calibrate the phosphorus...
Calibration of a Movable Bed River Model
This paper discusses the calibration procedures used for a model study of three miles (5km) of the Arkansas River. A hydro-power station will be added to an existing Corps of Engineers...
Accelerated Life Testing of Generator Coils
This paper presents a step-by-step procedure for doing a 400 hour, 60 Hz, 90 degree C accelerated life test on generator coils. Test procedure is as follows: 1. Initial coil examination...
Water Distribution Network Calibration Considering Multiple Loading Conditions
Through time a water distribution network's carrying capacity is reduced as material collects on pipe walls. The impact varies with each pipe in the system and occurs at an...
Hydrologic and Hydraulic Calibration?A Case Study (a)
The Addison Creek watershed is in Cook and DuPage Counties just west of Chicago, Illinois. Because the watershed has a history of major flooding, eight major stormwater and flood control...
A Front End Expert System for the Calibration of SWMM Runoff Block
An expert system is discussed which acts as a front end to the Storm Water Management Model (SWMM) for the purpose of preparation of data input and parameter selection. The structure of...
Calibration of Water-Velocity Meters
The U.S. Geological Survey, Department of the Interior, as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration...
Calibration of an Evapotranspiration Model Using Eddy Correlation Methods
An evapotranspiration (ET) prediction model was developed by calibrating the H. L. Penman equation for an alfalfa reference crop in the southwestern Oklahoma region. Evaporative flux for...
Crop Yield Models Adapted to Irrigation Scheduling Programs
A crop yield model (CRPSM) was adapted to match the data obtained with typical irrigation scheduling programs. Daily soil water content was calculated from weather data, crop growth stage...
A Possible Definition of the Input Function for a Rainfall-Runoff Model with Lumped Parameters
It may be useful to introduce, instead of a 'mean areal rainfall', another input function, defined as that input which is transformed by the model into a known...
Optimization of Complex Hydrologic Models Using Random Search Methods
The primary objective of automated calibration of complex conceptual hydrologic simulation models is to find the global optimum of a specified response surface. While direct search techniques...
Automatic Calibration of Conceptual Rainfall-Runoff Models
An automatic calibration strategy applied to land and channel components of the National Weather Service River Forecast System is outlined. Aspects discussed include the objective function...
Flat Dilatometer Tests in Calibration Chambers
This paper presents the results of a series of Flat Marchetti's Dilatometer Tests (DMT's) performed in a large Calibration Chamber (CC) on dry Ticino (TS) and...
In-Situ Microocosms for Calibrating Dynamic Models
The calibration of dynamic water quality models for lakes and reservoirs requires significant quantities of data, experience, and judgement. In particular, the identification of an appropriate...
Modeling Urban Runoff Quality: State-of-the-Art
Procedures used in urban runoff quality modeling are reviewed in the context of common objectives of urban runoff quality analysis. The need for calibration/verification data is emphasized...
Return to search