Validation of Consolidation Properties of Phosphatic Clay at Very High Void Ratios
The void ratio-effective stress and void ratio permeability relationships for phosphate slime mine tailings were measured by several methods. The measurements were used in nonlinear finite...
Consolidation Performance of Soft Clays: Part 1. Model
The simplified version of the soil model used in the finite element scheme is a linear anisotropic elastic model. Part 1 defines the parameters needed for the model and the laboratory...
Consolidation of Multi-layered Clay
Three kinds of clay with different plasticity were pre-consolidated from slurry and combined into typical two layered systems consolidated under 40 tf/m**2 with single drainage condition....
Consolidation by Sand Drain in Anisotropic Ground
The author reduces Biot's equations of consolidation into a single governing equation with the excess pore water pressure as the only unknown function and derives the theory...
Perspectives on Modelling Consolidation of Dredged Materials
The physical and mathematical aspects of this problem are highly nonlinear and material-property relationships extend beyond the scope of standard geotechnical engineering. The potential...
Waste Phosphatic Clay Disposal in Mine Cutsr
Research was undertaken to assess the applicability of waste clay disposal back into phosphate mine cuts. The pit was monitored for two years with measurements of clay surface elevation,...
Centrifugal Modeling of Phosphatic Clay Consolidation
As a by-product of beneficiation, quantities of dilute clay slurry are produced which are stored in retention ponds. One method of accelerating consolidation is to surcharge the clay with...
Trends in Computerization in the Eighties
This paper addresses trends in computer-aided productivity tools for Civil Engineers in the eighties. Certain aspects of the past history, present status, and future of CAD/CAM and CAE...
Water for Resource Development
The primary goal of these proceedings is to provide an awareness of the many areas of resource development in which hydraulic engineering plays a key role. The papers cover a variety of...
Modeling the Drying of Dredged Material
The drying of dredged material was modeled mathematically as a diffusive process and the governing equation was solved using an integral method. Closed form solution equations are presented...
Impacts of an Overboard Disposal Operation
The objective of this study was to establish an acceptable dredge disposal site which would be physically and environmentally suitable for periodic use over the 50-year project life of...
Dredged Material Disposal Modeling - Chesapeake Bay
A plan to deepen the approach channels to Baltimore Harbor from 42 feet to 50 feet involves in part the overboard disposal of about 9. 5 million cubic yards of dredged material in the...
Turbidity Generated by a Model Cutterhead Dredge
The study of turbidity generation indicates that, in general, turbidity increases with an increase in the cutter speed and an increase in the cutter swing velocity. A silt curtain deployed...
Computer Models for Dredged Material Disposal Planning
Short term and long term planning for the disposal of dredged material can be significantly enhanced using state-of-the-art computer modeling. Computerized mathematical models can be constructed...
Shoaling Problems and Improvements Sunny Point, North Carolina
The Military Ocean Terminal, Sunny Point (MOTSU), is located on the Cape Fear River, approximately 18 miles downriver from Wilmington, North Carolina. The facility has experienced significant...
The National Dredging Data Management System
The ADDAMS computer program is a collection of user-friendly computer models for planning, designing and managing confined disposal areas. Models which can be used to determine the size...
Confined Disposal in the Canadian Great Lakes
The dredging activities of Public Works Canada, Ontario Region, extend over most of the Canadian Great Lakes thereby significantly impacting on its environment. The paper presents a brief...
Use of Scientific Data for Management of Dredged Material Disposal in New England
Management of dredge material disposal in New England is closely attuned to regulatory mandates and is significantly supported by scientific findings and contributions of the Disposal...
After Industry Capability Program
This paper presents information on the dredging work split between the government and industry since the end of the Industry Capability Program (ICP) in Fiscal Year 1981. A long-term look...
Dredge Cutterhead Flow Processes
Feasibility studies of new dredge intake and cutterhead shielding techniques were conducted to improve hydraulic cutterhead dredge performance. Simple modification of the suction mouth...
Return to search