Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...
Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
Performance of a Berm Roundhead in the St. George Breakwater System
A new harbor under construction on St. George Island in Alaska's Bering Sea is using the berm breakwater concept for protection from wave attack. Three breakwaters are included...
Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Water Power '87
The 1980's have been characterized as an era of uncertainty for world energy including future demand for energy, fuel prices and availability, regulatory constraints, environmental...
Foam Over Troubled Toxics
Foams are now being used to control noxious vapor emissions from hazardous waste landfills. Another use of foams is in control of vapors emitted by chemical spills and fires. This article...
Pinpointing Nonpoint Pollution
The Tennessee Valley Authority is using aerial photography to locate nonpoint sources of water pollution. These cause most of the water quality problems in the region. Failing septic tanks...
Future Shock for Farmers
An expert panel of water and agricultural practices specialists met and predicted how the nation should and might deal with problems associated with nonpoint pollution sources, especially...
Steel Pipe Foundations for Deep Water
Four innovations are helping to make steel pipe piles more popular for foundations in deep water in Southeast Asia. Until recently steel was usually rejected for these applications, because...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Injecting an Oxygen Fix
Seasonal dissolved oxygen deficiencies are an old problem in hydropower discharges from deep impoundments. At the Richard B. Russell Dam near Savannah, Georgia, an innovative solution...
The `Down' of Top Down
The 800-space parking area for the Milwaukee Center was built in a four story deep basement of the building. In order to excavate the area without damaging two adjacent historic structures,...
Priority Integrated Pipe Evaluation
The selection of the most suitable pipe for a given site involves the consideration of many factors affecting pipe performance. The factors to consider in sewer pipe evaluation and selection...
Current Developments in Reinsulating/Waterproofing Underground Steam Mains in New York City
The objective of Con Edison's reinsulation project is to develop the materials and technology necessary to reinsulate those steam distribution mains having excessive thermal...
Iowa's Experience with Various Types of Pipe in Natural Gas Service
The Utilities Division, Iowa Department of Commerce, is responsible for the rate, service, and safety regulation of utility companies in the State of Iowa. This paper will summarize a...
Boston's Water Distribution Corrosion Control Program
The Boston Water and Sewer Commission (Commission) was formed in 1977 with a mandate to maintain sound, economical, and efficient systems for water distribution and wastewater collection...
Soil Parameters for Design of Buried Pipelines
This paper presents the table of recommended design parameters for soil, shows their physical significance, and compares the resulting stiffness and strength for the variety of soil and...
Return to search