Top Projects of 1986
In the 1986 ASCE competition to select the Outstanding Civil Engineering Achievement of the Year, 14 projects were nominated. This article describes the 10 non-winners. Technically the...
Available Compaction Equipment
When discussing available compaction equipment we must keep in mind the purpose of compaction. Compaction is the art of artificially increasing the density or increasing the unit weight...
Construction of Roller-Compacted Concrete Pavement
Roller-compacted concrete pavement (RCCP) is the product of a relatively new concrete paving technology in which a zero-slump portland cement concrete mixture is spread with modified asphalt...
Financial Development for Projects
An important element in the total package of Bechtel's engineering and construction services is the financing and commercial assistance offered in support of our client's...
Restoration of Navy LTA (Lighter Than Air) Hangars
In 1942 and 1943 the Government constructed a series of 16 blimp hangars at ten Naval Air Stations along the east coast, west coast and gulf coast. The hangars erected in pairs housed...
Use of Nondestructive Testing in Rehabilitation of Wood Cooling Towers
State-of-the-art nondestructive evaluation (NDE) techniques, destructive testing, structural analysis, degradation rate models and statistical analysis are combined to optimize a major...
Decay in Wood Structures
One of the main causes of wood deterioration is decay. Decay causes millions of dollars in damage to timber structures each year. Left unchecked, decay deterioration can become a structural...
Case Studies in Upgrading of Wood Trusses and a Heavy Timber Building
Three case studies in upgrading and rehabilitation of wood structures are presented. One case study relates to three 30m (100ft) span bowstring trusses that had to be cut at various span...
Epoxy Repair of a Glulam Beam
The repair of timber structures by epoxy injection techniques is a recently developed repair alternative. Theoretical and experimental studies have resulted in the formulation of design...
Hypars and Wood Shells?The Boston College Recplex
For the past twenty years, we have been involved in the design and construction of intermediate span wood hyperbolic paraboloid. During that time the spans have ranged from 50 ft. to 200...
Alterations to Old Wood Building
In order to accommodate a new use, a request was made to remove bearing walls supporting the roof of a 42 year-old building and substitute timber posts. The existing nine-foot ceiling...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Evaluation of the Seismic Performance of Buildings
The aim of the paper is to present the different existing methodologies available for the assessment of seismic damage to buildings. The approach aims towards the development of a mini-computer...
Rapid Identification of High Risk Building in Seismic Regions Using Expert Systems
Seismic risk evaluation is a complex problem because it involves many factors such as ground motion, ground failure potential and structural performance with great uncertainties. Many...
Seismic Risk Analysis of a Multi-Site Portfolio of Buildings
A discussion of a methodology that permits the assessment of the seismic risk associated with a group of buildings and incorporates relevant aspects of seismic hazard assessment including...
CAPPS: Custom Architectured Parallel Processing System
CAPPS (Custom Architectured Parallel Processing System) is under development at Paragon Pacific Inc. , Torrance, CA, for the solution of computationally intensive engineering problems....
Guide to Investigation of Structural Failures
Prepared by the Research Council on Performance of Structures of ASCE. This report contains guidelines for conducting an investigation into the causes...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
Lessons Learned from Design, Construction, and Performance of Hydraulic Structures
The intent of this publication is to provide lessons learned, both positive and negative, from activities associated with design, construction, and performance of hydraulic structures....
Managing Two Projects as One
The Port of Tacoma completed a new two berth container terminal and intermodal yard for Sea-Land in May 1985, only 26 months after signing a binding agreement. The project, which also...
Return to search