Steel Fibre Reinforced Shotcrete Design
There is a need for introducing toughness and ductility in SFRS design. The Japanese Standard introduces the equivalent flexural strength, which characterizes SFRS toughness and allows...
Shotcrete for Underground Support V
This proceedings consists of papers presented at the Engineering Foundation Conference held in Uppsala, Sweden on June 3-7, 1990. They are divided into sections concerned with the design...
Supply-Side Solutions
Although the crumbling bridge infrastructure has received much attention in the press and the engineering community over the past few years, the number of structurally deficient bridges...
Plastic Piling
Composite plastic and steel piles are gaining acceptance throughout the United States. The evolving technology has produced a unique product which solves several problems related to use...
Sensitivity Analyses for Total-System Performance Assessment
As a follow-on to Sandia's 1991 preliminary total-system performance assessment of the Yuc1ca Mountain site, this paper presents results of some sensitivity analyses that were done using...
Marginal Overweight Operating Scenario for DOE's Initiative I Highway Casks
This paper assesses the potential transport of high-capacity Initiative I highway casks under development by the Office of Civilian Radioactive Waste Management (OCRWM) as permitted marginal...
Alternatives Analysis Using Two-Dimensional Modeling for the Owensboro Bridge and Approaches
The Federal Highway Administration plans to design and construct a new bridge over the Ohio River near Owensboro Kentucky. A hydraulic model with two-dimensional capabilities was utilized....
A Structural Analysis System
In this paper, the importance of the structural analysis in accordance with the construction progress was emphasized to accurately predict the structural behavior of prestressed concrete...
Computer Analysis of Cable-Stayed & Suspension Bridges
The finite element structural analysis of long span bridges is an area of research that has been studied within the past thirty years since the development and emergence of the digital...
Modeling Beam Torsion in Prestressed Concrete Box Beam Bridges
This paper briefly summarizes the development of a specialized finite element model capable of predicting the elastic and inelastic behavior of beam-slab type prestressed concrete spread...
Time-Dependent Nonlinear Analysis of Cable-Supported Prestressed Concrete Bridges
A method of analysis and a computer program CFRAME for the material and geometric nonlinear analysis of cable-supported planar prestressed concrete bridges including the time-dependent...
Finite Element Analysis and Design of Bridges with Applicatrons of ICAD
This paper describes applications of client-server models, interprocess communications (IPC), and concepts of intelligent CAD (ICAD) to the interactive design and analysis of highway bridge...
Effect of the Periodic Secondary Irregularity on the Dynamic Behaviour of Railway Bridge-Vehicle System
The deformation and vibration of bridge will be developed due to the moving vehicles, especially for railway bridge. The dynamic deflections in the points under each wheel are called secondary...
Finite Element Representation of Approach Slabs
Approaches to bridges are designed to provide a smooth and safe transition from the highway pavement to the bridge deck and back to the highway pavement. Generally this transition area,...
Grillage Analogy for Multigirder Bridges
Grillage analogy is a method frequently used to simulate the structural response of highway bridges with reinforced concrete deck and steel girders. This approach saves substantial efforts...
A New Approach for Road Network and Bridge Planning
Road networks usually include a large number of bridges and tunnels. The locations of these bridges and tunnels are decided by the road planner during the design of the road alignment...
Dynamic Response of Bridges Under Traffic Loads
Numerous analytical and experimental investigations have been carried out in the past to study the complex dynamic problem of the response of a bridge deck to a moving vehicle. However,...
Combined Boundary Element and Finite Element Analysis of Composite Slab on Girder Bridges
In this paper, the coupling of boundary element and finite element methods and its application to analyze slab on girder bridges are studied. The boundary element method (BEM) is employed...
A Finite Difference Approach to the Modelling of Thick Bridge Decks
The finite difference method, although well known as an efficient numerical method, was applied in the past, in the case of slabs, only for the solution of thin slabs. In the present study,...
A Constraint-Based Composites Design Advisor
Most engineering problems, because they involve mathematical relations (constraints) on real valued quantities (objects), can be reduced to constraint networks. The authors speculate that...
Return to search