Alterations to Old Wood Building
In order to accommodate a new use, a request was made to remove bearing walls supporting the roof of a 42 year-old building and substitute timber posts. The existing nine-foot ceiling...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Evaluation of the Seismic Performance of Buildings
The aim of the paper is to present the different existing methodologies available for the assessment of seismic damage to buildings. The approach aims towards the development of a mini-computer...
Rapid Identification of High Risk Building in Seismic Regions Using Expert Systems
Seismic risk evaluation is a complex problem because it involves many factors such as ground motion, ground failure potential and structural performance with great uncertainties. Many...
Seismic Risk Analysis of a Multi-Site Portfolio of Buildings
A discussion of a methodology that permits the assessment of the seismic risk associated with a group of buildings and incorporates relevant aspects of seismic hazard assessment including...
CAPPS: Custom Architectured Parallel Processing System
CAPPS (Custom Architectured Parallel Processing System) is under development at Paragon Pacific Inc. , Torrance, CA, for the solution of computationally intensive engineering problems....
Guide to Investigation of Structural Failures
Prepared by the Research Council on Performance of Structures of ASCE. This report contains guidelines for conducting an investigation into the causes...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
Lessons Learned from Design, Construction, and Performance of Hydraulic Structures
The intent of this publication is to provide lessons learned, both positive and negative, from activities associated with design, construction, and performance of hydraulic structures....
Record High Rise, Record Low Steel
The Bank of China, under construction in Hong Kong, will be the world's fifth tallest building. In spite of the extraordinary codes for that city�high winds, and high live...
Explicit Integration of Boundary Integral Equations in the Frequency Domain for Wave Scattering Problems
The goals of this article are: (1) to present an efficient method for the integration of the boundary integral equations for wave scattering problems and (2) to apply this method to the...
A BEM-Perturbation Technique for Membrane Structures
Most of the previous work has concentrated on the free vibration problem. The present paper examines the problem of low frequency forced vibrations of a membrane due to an oscillatory,...
Nonlinear Quasi-Static and Transient Response Analysis of Shallow Shells: Formulations and Interior/Boundary Element Algorithms
Nonlinear integral equations are derived for the representation of displacements of shallow shells undergoing moderately large, quasi-static or dynamic deformations. A combined interior/boundary...
3-D Flexible Embedded Machine Foundations by BEM and FEM
A study on the dynamic response of three-dimensional flexible massless foundations of arbitrary shape, embedded in a homogeneous, isotropic and linear elastic half-space and subjected...
Seismic Interaction Among Numerous Masses Founded on a Viscoelastic Stratum
The steady-state harmonic response of systems comprising numerous masses resting on a homogeneous, viscoelastic stratum with hysteretic damping is studied. The stratum, bearing on a rigid...
Harmonic Vertical Pile Response in Non-Homogeneous Medium
This paper describes the application of the boundary element method to determine the steady state response of vertically loaded floating piles in a non-homogeneous medium in which the...
Vibration Isolation of Structures From Surface Waves in Layered Soil
This work deals with the problem of isolation of structures from ground transmitted surface waves generated by machine foundations. The isolation is accomplished by means of rectangular...
Seismic Response of Pipes Supported on Complex Frames
Analytical approaches and modeling techniques used to calculate seismic responses of piping systems, supported on complex open-frame structures, are evaluated. Seismic responses are obtained...
Offshore Platforms Subjected to Wave Forces
The dynamic analyses of offshore platforms are mostly based on the lumped mass matrix method in the frequency domain. Although the approximations involved in the lumped mass matrix method...
Explosive Loading of Surface Ships
This paper describes the recent development of numerical methods which have accurately predicted the response of surface ships subjected to underwater explosion tests. The technique couples...
Return to search