Comparison of Flush and Chamber Mounted Dynamic Pressure Transducer
Modeling of hydraulic structures often includes the measurement of dynamic pressure fluctuations. The accuracy of the pressure measurements depends upon the geometry of the tap. Flush...
Coronarization of the Autonomous Water pump
The conventional hydraulic pressure multiplier has been successfully used by Belgian technician Robert Houman (1986) to provide a dependable source of water supply to the NATO-base at...
Redondo Beach King Harbor Model Studies, California
Redondo Beach King Harbor frequently experiences damage when large winter waves occur in conjunction with high water levels. Damages consist of revetment failure, land erosion, flooding,...
Low-Head Drop Structure Hazards: Modeling of an Abrupt Drop Boat Chute
Low-head drop structures are dangerous for navigational and recreational boating in rivers. In an effort to reduce drowning hazards at low-head river drop structures, a boat chute bypass,...
Grid-Induced Errors in Depth-Averaged Flow Fields
A computer code called CH2D (Curvilinear Hydrodynamics in Two Dimensions) for computing depth-averaged free-surface flow fields has been used to assess the impact of the rate of change...
Effects of Tide on Variation of Beach Profile
Effects of tide on variation of beach profile are examined experimentally. It is clarified that tidal effect appears differently when it acts on beach of different profiles. Namely, in...
Cumulative Impacts Analysis on a Midwest Fluvial System
The US Army Corps of Engineers recently completed an analysis of the cumulative impacts of erosion control structures on the Platte River in Nebraska. This was done in response to concerns...
Effects of Low Drop Grade Control Structure on Bed and Bank Stability
The channel response upstream of a low drop grade control structure was documented using field investigations, analysis of the engineering properties of bank materials, and repeat cross...
Stabilization of an Alluvial Channel in an Urbanized Area
Grade stabilization structures have been used for many years to control degradation of alluvial stream in the southwest. These structures result in reducing the gradient of the stream...
Mechanical Aspects of Intake Gates at John Hart Dam
As part of the John Hart Dam rehabilitation program completed in 1988, six new intake gates complete with guides and hydraulic operators were installed replacing the existing gates and...
Corps of Engineers Sediment Management Program
The existing sediment management program includes sediment investigations of reservoir, river and levee projects; gathering and maintaining sediment load records; providing sediment investigation...
Major Sedimentation (Erosion) Issues and Ongoing Research and Developments at the USDA-ARS
The U.S. Department of Agriculture, Agricultural Research Service (ARS) has research programs designed to produce techonology with which to predict, measure, and control erosion and sedimentation...
River Engineering and Environmental Resources
The federal government and the Corps of Engineers (CE) are committed to preserving and enhancing environmental quality. Research and development support for this commitment in the realm...
CCM Overtopping Protection on Three Parkway Dams
Cellular concrete mat (CCM) overtopping protection systems have been designed for and will be installed on three small embankment dams along the Blue Ridge Parkway. Based on recent field...
Model Tests for Design of Vibration-Free Gates
Experimental results are presented of hydraulic forces acting on an underflow gate. Underflow gate is a socalled bluff body and a review of the mechanism of vibration caused by separation...
Experiences With a Supercomputer
The advent of ever faster and ever larger computers is opening new areas of scientific study. Within this computational revolution, however, are real people trying to cope with the vagaries...
Microcomputer Applications in Transportation III
This proceedings consists of papers presented at the International Conference on Microcomputers in Transportation which was held on June 21-23, 1989 in San Francisco, California. They...
Modeling Not By the Numbers
A model is likely to be the tool for making predictions of the ecological impact of an engineering decision. However, ecologists often find it difficult under pressures of time and lack...
The Stacked Drift Tunnel
The Mount Baker Ridge Tunnel is the first of its kind and the last: a forward thrust of technology and a look back to the flow of federal highway funds, which paid 90% of its cost. The...
Franchising for the Future
Franchising is no longer reserved for hamburger stands or quick print photo processors. Now engineers may decide to join lawyers and dentists in future franchise operations. In today's...
Return to search