Improving Maintenance Performance
This discussion concerns Maintenance Management concepts that emphasize how the human element among Port personnel can be organized and efforts channeled so as to: increase the actual...
Puget Sound Alluvium: A Challenge in Design of Pile Supported Port Facilities with Dredged Slopes
The geotechnical investigation, evaluations, and recommendations for the Port of Seattle Terminal 18/20 Improvement Project are described and compared with observed performance during...
Geotechnical Considerations in the Design of the Wando Terminal Wharf Extension, Charleston, South Carolina
The South Carolina State Ports Authority (SPA) is currently examining construction concepts for the proposed 1,200-foot wharf extension and 40 acres of adjacent upland development at the...
Overdredging at Existing Gravity Structure
Pacific Elevators Ltd. decided to upgrade Berth No. 2 to handle ships up to 70,000 DWT. The difficulty was to maintain the support of the cribs after dredging of the berth to minus 45...
Marginal Wharf and Embankments?Seismic Design
This paper presents some of the seismic considerations used for the improvements at Berths 225 to 229 at the Port of Los Angeles. The design of the improvements was complicated by the...
Local Government Infrastructure Management
The collection of papers presents real world experiences and practical suggestions for improving infrastructure management in local governments. A case study is presented on how a computer-based...
Ports '86
Ports '86 had the theme of Innovations in Port Engineering and Development with keynote speakers looking ahead to Port Development in the 1990's. The program...
Parking Lot Gets White Top
The many-acre parking lot at the Valley Fair Mall shopping center in Salt Lake City, Utah is described. In 1985 the asphalt pavement was overlaid with concrete, making it one of the relatively...
Oxygenation of Releases from Richard B. Russell Dam
The oxygen injection system at the Richard B. Russell project has a continuous injection system located 1 mile upstream of the Russell damsite but also has supplemental injection capability...
Colorado High Mountain Aquifer Study
This paper describes the potential for formulating water projects in Colorado using the storage capability of high mountain glacial aquifers. Although a terminal moraine provides a natural...
Utopia Under Glass
We stand within sight of the day when our reserves of fossils fuel will be inadequate to maintain the type of energy inefficient cities we have grown used to. This exercise in urban planning...
A Generic Design for On-Site Low Level Radioactive Waste Storage
This paper describes a generic design for an on-site low level radioactive waste storage facility. The generic design encompases the development of design criteria including an envelope...
Building Arrangement and Site Layout Design Guides for On Site Low Level Radioactive Waste Storage Facilities
This paper will discuss a typical storage facility and address the design considerations and operational aspects that are generally overlooked when designing and siting a low level radioactive...
The Origin, Training, Evaluation and Status of Construction Inspectors
Inspection of construction is mandated by law. Design engineers cannot disclaim their responsibility for construction inspection by citing self-serving language in the contract documents....
Requirements of a High Technology Owner
The requirements of a high technology owner are best represented by a set of expectations and goals that are needed to achieve a certain business plan. There are extreme time pressures...
Structural Engineering for High Technology Clients
The unique requirements of the high tech industry provide interesting and fascinating challenges to the structural engineer of the 1980's. The following is a list of the most...
Design of High-Technology Facilities from the Vibration Standpoint
High-technology facilities, such as those used for the production of integrated circuits or for optics research, generally require extremely limited vibration environments. Suitable precautions...
Renovation Versus New Construction for High Technology Manufacturing Facilities
The purpose of this paper is to compare the differences between renovation and new construction for High Technology Manufacturing Facilities. The standards of quality, cost, and schedule...
Facility Location and Land Use: The Urban/Rural Dilemma?A Commentary
A large part of the dilemma associated with the conflicting impacts of facility location and land use is not so much a lack of technical engineering input, but rather the lack of analytical...
Designing People Places
Designing people places on the waterfront relies on first satisfying people's needs. The needs of people in public places (both on and off the waterfront) include at least...
Return to search