Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...
Minimum Design Loads for Buildings and Other Structures
Grouting Methods
This chapter discusses common grouting methods used in underground applications in both soil and rock. Jet, compaction, permeation, and hydrofracture grouting methods are frequently used...
Performance-Based Design Method (PBDM)
This chapter discusses the performance-based design method (PBDM). Topics include performance objectives; recommended analysis methods; modeling guidance; preliminary proportioning; acceptance...
Maximum Weighted Log-Likelihood Estimation for Parameterization Selection Uncertainty
Hydraulic conductivity identification remains a challenging inverse problem in groundwater modeling because of inherent non-uniqueness and lack of flexibility in parameterization methods....
Groundwater Transport Modeling Using Fuzzy Sets and Fuzzy Logic
Modeling of groundwater flow and transport is inherently uncertain. The predictive capability of the model depends upon both the quantity and quality of hydrogeologic data. The introduction...
Viral Fate and Transport Modeling under Salinity Impact
This research studied the impact of salinity on sorption and transport of MS-2 in saturated sand through one-dimensional column experiments. MS-2 was used as a surrogate to understand...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...
Current Programs in American Post-Secondary Wood Design Education
Wood engineering has been a requirement in civil/structural engineering education curricula forcenturies. In 1990, a comprehensive survey was conducted of wood engineering educationprograms...
The Role of Aesthetics in Bridge Design
The role of aesthetics in current bridge design practice varies widely. Many bridgeprojects in the United States are developed without including aesthetics as one of theproject goals....
Structures Congress 2008
Crossing Borders
The 40th Structures Congress's technical program consists of 10 tracks and three poster sessions. The program covers practical design in the following topic areas including...
Evaluation of Geopier Rammed Aggregate Piers by Geopier Foundation Company
Final Report
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...
Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...
Design-Build Contract Complexities
There are many approaches or options that an owner may pursue in acquiring facilities. Depending on the owner's objectives, the DB project approach may offer unique benefits,...
Project Definition and Conceptual Design
In order to select a DB contractor, the owner must define its requirements for project implementation and for the completed project. These requirements are typically incorporated into...
General Terms and Conditions
DB commercial contract terms can differ from conventional design-bid-build project terms, depending primarily on the owner's objectives, the level of risk that is to be assigned...
Specifications for Design-Build Projects
This chapter discusses the various specifications that come with a design-build project, including owner-generated specifications and contractor-generated specifications....
Geo-Denver 2007
New Peaks in Geotechnics
Proceedings of Geo-Denver 2007, New Peaks in Geotechnics, held in Denver, Colorado, February 18-21, 2007. Sponsored by the Geo-Institute of ASCE. This collection contains nearly 300 papers...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Return to search