Building Frame Analysis in Basic
Moment distribution has, for the past 30 years, been the most popular method of analysis for statically indeterminate structures. Programmed in Basic for the microcomputer with relative...
Controlled-leak Methods for Water Level Control
The controlled-leak methods are a group of similar techniques for controlling upstream water levels, downstream water levels, or offtake canal discharges. They require no electrical power...
Evaluation of and Recommendations for Drop Structures in the Denver Metropolitan Area
In 1982, the Denver Urban Drainage and Flood Control District published interim guidelines for the design of sloped, loose riprap drop structures, as well as vertical wall drop structures...
Design Considerations for Hydraulic Jump Structures
The primary purpose of this paper is to define the areal distribution of large-scale pressure pulses acting on the containment structure of a hydraulic jump. The results presented are...
Hydraulic Structures on Piles
Many hydraulic structures built in the early 1900's were founded on piles. Today, when these structures are analyzed as 'pile-supported', the analyses...
Dam Safety Improvements for Tolt River Dam
Studies were performed to identify measures to improve the safety of the project under earthquake and extreme flood conditions while permitting the owner to store additional water under...
Underwater Inspection of Hydraulic Structures
Improvements in diving equipment, and underwater testing and instrumentation devices in recent years have increased the value of underwater inspections and reduced the cost. This paper...
Parametric Analysis of Concrete Gravity Dams using Finite Element Analysis
More sophisticated means of analyses have been investigated to determine the accuracy and applicability of conventional methods to a range of parameters affecting stability. This paper...
Verification of a Generalized Mudflow Model
This paper presents the results from recently completed studies verifying the accuracy and applicability of a generalized one-dimensional model for dynamic routing of mudflows. Numerical...
Scour Downstream of High Level Emergency Spillways
The Corps of Engineers has numerous high level emergency spillways (HLES) including some that have the potential for excessive scour downstream during certain flow events. 'Excessive...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
Modeling Materials for Protecting Earth Weirs
This paper reports laboratory experiments on various materials used to protect earth weirs. Dumped rock, gabion mattresses, and shaped blocks on a gravel layer were subjected to high velocity...
Design of Overtopping Protection for Small Dams
Many existing small embankment dams in the United States cannot safely pass current design floods without overtopping. In the past several years, embankment overtopping protection has...
Hydraulic Model Investigation of the North Diversion Structure, Albuquerque, New Mexico
The North Diversion Structure diverts storm runoff around Albuquerque, New Mexico. Observed flow conditions have caused concern about the capacity of the structure and the safety of a...
Input Programs for Engineering Applications
This paper discusses several input program types and the data structures associated with them. Two input programs were designed for KYPIPEF to demonstrate the use of files of records and...
Numerical Model Analysis of Sedimentation Problems at Lock and Dam 1, Red River Waterway
This paper addresses the numerical modeling techniques used to identify the conditions and parameters affecting sediment deposition at Lock and Dam 1. Two-dimensional finite element models...
Diversion Structure for Peak Flow Reduction
The flood control requirements of a planned development in the City of Orange, California were such that the peak discharges ranging from an annual flood up to 25-year return period be...
Calibration of an Evapotranspiration Model Using Eddy Correlation Methods
An evapotranspiration (ET) prediction model was developed by calibrating the H. L. Penman equation for an alfalfa reference crop in the southwestern Oklahoma region. Evaporative flux for...
The Inflatable Weir and Its Widespread Employment for Irrigation in Japan
Although introduced in the U. S. in the 1950's for groundwater recharging, the inflatable weir has become established only in Japan, in which case it is used almost entirely...
Modeling Branching Irrigation Canal Networks
A mathematical model of branching canal network has been developed based on solving the integrated form of Saint Venant equations which describing steady and unsteady, uniform and non-uniform...
Return to search