An Expert System for Stop-Controlled Intersection Design
In 1915, the first stop sign was installed in Detroit, Michigan, but until now, there was still no one coordinated body of knowledge which would dictate design and analysis requirements....
The Use of Linked Spreadsheets as a Transportation Problem Solving Tool
Spreadsheet modeling is a useful tool for business as well as engineering applications. Until the advent of linked spreadsheets this type of modeling was based on the concept of preparing...
A Peak Hour High Capacity Reservation and Person-Based Functional Classification Concept for Urban Mobility Plans and Corridor Growth Management
The management of future growth and mobility in urban corridors and areas has been based in part upon use of the Levels of Service and procedures of the Highway Capacity Manual. Capacity...
Assessment of the Potential for Tectonic Fault Rupture for High-Level Nuclear Waste Repositories
Active faults that extend to or near the Earth's surface may threaten the safety of engineered structures. The threat can be mitigated by appropriate siting and design, which requires...
Design and Performance Requirements for Surface Facilities of a High Level Nuclear Waste Repository
This paper describes three important steps in the design process of repository surface facilities: (1) Establishing performance requirements and risk levels, (2) translating performance...
Superfund: New Leadership, Old Problems
The often contentious Superfund program faces a Democratic administration�the first one since its inception�and reauthorization by a new congress, armed with a mandate to cut government...
Environmental Consulting Grows Up
The environmental engineering industry got its first taste of maturity in 1992, courtesy of the weak U.S. economy. Revenue growth, which had raced along at a 25%-30% clip for years, abruptly...
Data Validation Practices and Risk Assessment
The accuracy of environmental site assessments depends on the validity of the data used to make them, but all too often, the people who judge the quality of the data have little idea of...
Seismic Response of Average High-Rise Building Structions in Japan
Dynamic characteristic models, representing average high-rise building structures in Japan, have been established through the regression analyses utilizing review documents of seismic...
Safety Enhancement of Bridges with Seismic Isolation Bearings
This paper summarizes the experimental and analytical studies done at Dept. of Civil Eng., Kyoto Univ., on application of base isolation bearings to highway bridges and the Menshin (base...
Seismic Design Considerations for Uplifted Tanks
An evaluation of the most commonly used seismic design procedures for unanchored tanks is presented. It is noted that current standards are inconsistent in predicting the behavior of unanchored...
Lifeline Structure Design Issues?A Case Study of Current Bridge Seismic Design and Application of Recent Seismic Design Research
The purpose of this paper is to present the major design issues addressed in the design of Terminal Separation (Replace) and I-880 Reconstruction. To address these issues Caltrans set...
Recent Improvements in the LLNL PSHA Methodology
For the purpose of comparison, the LLNL PSHA methodology is defined as the 1989 version developed under contract for the NRC. Additional work on a series of subsequent projects for DOE...
Fundamental Issues in Seismic Safety in Midwestern U.S. Due to Hazard/Vulnerability Relation
Problems in establishing and mitigating seismic risk in urban areas when seismicity is not confidently based on instrumental records are discussed. Urban Southwestern Ohio is a specific...
Seismic Standards for Existing Federally Owned and Leased Buildings
Public Law 101-614 requires the Interagency Committee on Seismic Safety in construction to develop 'standards for assessing and enhancing the seismic safety of existing buildings constructed...
The European Approach to Seismic Design of Engineered Timber Constructions: The Case of Low-Dissipative Structures
In the present paper the importance of the dissipated energy on the actual structural behaviour of low-dissipative structures as glulam portal frames with mechanical fasteners under seismic...
Wind Design and Analysis for the Normandy Bridge
The Normandy Bridge will represent an important progress in the field of cable-stayed bridges, with a main span 856-metre long. This paper explains how the design has been oriented to...
Things That Fall?Lessons from Some Construction Accidents and Structural Failures
The causes and results of several construction accidents are reviewed. The lessons to be learned from such a summary are that all too often the simplest oversight leads to catastrophic...
Diagnosing Lateral Strength of Existing Concrete or Masonry Buildings
A research prospectus is presented for improving present methods of structural evaluation for concrete and masonry buildings. Specifically, the proposed research plan is limited to strength...
Mitigation of Wind-Created Risks During Construction
Wind damage to structures during construction has been found to be significant and often catastrophic. Structural failures are often the result of wind loads that are far less than the...
Return to search