Regional Planning Models Used in Subarea Windows
The typical regional travel-forecasting model has historically been confined to use on a mainframe computer. In an effort to reduce costs and allow computer hardware options, a three-tiered...
Microcomputer Site Models for Project Analysis
In 1984, the Genesee Transportation Council, the MPO for the Rochester New York area, undertook a study with the City of Rochester Bureau Of Planning and Zoning to investigate how microcomputers...
Traffic Planning Using Interactive Color Graphics
This paper describes the MULATM microcomputer traffic planning model, as an example of the possible uses for microcomputers in transportation planning. These uses include interactive input/output,...
Applying the Bus Garage Space Requirements Model
The Bus Garage Space Requirements Model (BBARN) is a computer-based model developed by the author to generate a detailed space program for an office/bus maintenance facility. BBARN provides...
Damage Mechanics and Continuum Modeling
Historically, the structural and mechanical engineers are conditioned to model a material in a purely phenomenological sense with little or no regard to underlying physical phenomenon...
Freezing and Thawing of Soil-Water Systems
This book presents a state-of-the-practice review on freezing and thawing of soil-water systems through ten interrelated papers on this subject. The papers review the following topics:...
Computing in Civil Engineering
A broad spectrum of computer applications in civil engineering is covered in 73 papers presented at the Third Conference on Computing in Civil Engineering. Emphasis is on microcompters...
Emerging Computer Techniques in Stormwater and Flood Management
These proceedings identify and assemble information on recent applications of mini- and microcomputer technology to problems in urban stormwater and flood management. Instrumentation and...
Traffic Reroute
During reconstruction of Pittsburgh's Interstate 376, traffic and passenger diversion efforts, more extensive than ever before, were undertaken. Eight percent of the $62 million...
Seismic Qualification of Main Control Boards by Combined Mathematical Model and In-situ Modal Test
By adjusting the stiffness of the model, mode shapes and frequencies can be matched to those from the in-situ tests, thus giving a verified and representative model. With the verified...
Seismic Capacities of Masonry Walls at the Big Rock Point Nuclear Generating Plant
An evaluation to determine the ability of selected concrete block walls in the vicinity of essential equipment to withstand seismic excitation was conducted. The seismic input to the walls...
The Response of Steel Containment Models to Internal Pressurization
To obtain insight and data on the response of containment vessels subjected to beyond design basis accidents, four 1/32 scale steel containment models have been subjected to internal overpressurization,...
Preliminary Analysis of Large Penetration Enclosures for Containment Vessels Subject to Beyond Design Basis Loadings
Numerical simulations of the macro-deformations of the sealing surfaces (gasketed junctures) of a PWR steel containment vessel's equipment hatch subjected to accident loadings...
Major Considerations in Scale Modeling of Reinforced Concrete Containment Structures
Reinforced concrete containment structures pose unique modeling problems, especially when leakage integrity is of interest. This paper presents a general discussion of modeling considerations...
Pipeline Hydraulic Transient and Leak Detection Analysis
Liquid and gas pipelines cannot be properly designed with consideration of steady flow analysis techniques alone due to the possibility of pipeline failure resulting from uncontrolled...
San Joaquin Valley Hydrologic-Economic Model
The rapid development of agriculture in the San Joaquin Valley has resulted in increased ground water pumpage. Increasing energy costs coupled with increasing pumping lifts have a major...
River Meandering
The erosion and sedimentation processes associated with river meandering have a profound effect on man's use of rivers and their valleys, as well as the natural environment....
Functional Specifications of a Distributed Engineering Data Management System
The development of a large-scale engineering data management system is outlined for AEC industries. Described are the outline specifications and basic design decisions used to implement...
Advances in CAD for Structural Engineers
In the 1980's Computer-Aided Design (CAD) will offer the structural engineer an opportunity to improve his work. Decreases in the cost of equipment and improvements in computer-aided...
Relational Model for Computer Analysis and Design
One of the most critical elements in engineering analysis and design is data management. Relational database systems have been proven to be an excellent tool for managing the voluminous...
Return to search