Strengthening of a Multi-Story Building with Deflection Constraints
Occasionally the existing structural or nonstructural systems of a building being strengthened require the imposition of deflection constraints or limits in order to avoid an undesirable...

Regional Risk Assessment of Existing Buildings
This paper describes current research underway at Stanford University designed to develop a methodology for determining high risk buildings in a region. The work involves developing a...

Building Identification: Needs and Means
The need to conduct 'system identification' of existing buildings by nondestructive testing is discussed. A recommended flow-chart is exemplified. Existing dynamic...

Evaluation of Seismic Strengthening of an Existing Building Using Base Isolation
This paper summarizes a study performed by Englekirk and Hart, Inc. to evaluate the feasibility of using base isolation to seismically upgrade an existing highrise building. To realize...

System Identification Applied to Pseudo-Dynamic Test Data: A Treatment of Experimental Errors
A single-input single-output system identification technique, used to estimate the modal properties of a full-scale six-story steel structure tested within its elastic range by the pseudo-dynamic...

Stiffness Parameters Identification of Frames
Four widely used methods of structural system identification are presented. A new formula and its derivation, based on the Bayesian estimation theory, is given. Time domain responses of...

Optimal Collection of Data for Parameter Identification
In this paper, the author attempts to study the optimal spacing of measurements for a structural system modelled by a single-degree-of-freedom oscillator so that the variance of one or...

Research Topics in Structural Identification
The authors examined a variety of possible research topics including identification and detection of nonlinearities, model improvement approaches, damage identification, power estimation...

Active Control of Distributed Parameters Structures by Pointwise Control Actions
Several methods have been offered to control a structure. These methods are the optimal control, the pole assignment, the independent modal space control, and the direct velocity feedback....

Optimal Control of Seismic Structures
This paper presents the algorithm for optimal design of structural systems with active tendon controllers and/or active mass dampers. The structure is subjected to earthquake excitation...

Application of Modern Control Theory for Building Structures
Active control systems can be used to reduce the effect of strong-motion earthquakes. During the past two decades, various approaches have been applied to find the optimal control law....

Bounded State Control of Structures with Uncertain Parameters
The control of linear systems in the presence of set constrained external disturbances has been investigated maintaining the states in a prespecified region by estimating the maximum reachable...

The Atlantic Palace: Part I Structural System Selection Based on Wind Tunnel Testing
The location of the structure in a coastal area susceptible to high winds, the irregular shape and height of the building and the desire for more accurate wind loading and acceleration...

Large Scale Testing Facility for the Evaluation of Structural Systems Under Critical Loads
The Charles Lee Powell Structural Systems Laboratory at the University of California, San Diego, provides, with a 50 ft. high reaction strong wall and a 120 multiplied by 50 ft. box girder...

Disney Engineers Voyage to the Deep
The main show at the Living Seas Pavilion, part of Walt Disney Production's EPCOT Center, Lake Buena Vista, Fla., is a visit to a tropical coral reef deep under the ocean....

Computer Cuts Tower Steel
Two computer programs developed by Lev Zetlin Assoc., New York City, revealed that some of the steel in what will be Philadelphia's tallest building, One Liberty Place, was...

Roof Membranes: New Systems, New Problems
Market trends in roof membranes are described; most important is the use of single-ply membranes of rubber or plastic in the past decade. A swing to modified bitumen membranes is predicted...

Construction Approaches to the Navy's Floating Pier Concept
The subject of this paper is a floating pier which is currently under evaluation as a more cost-effective solution for berthing Navy ships. This new approach to pier design was sponsored...

An OCEANWHEEL Breakwater
The compression wall and tension spoke structural system (OCEANWHEEL) transfers lateral loads from sea surface to seafloor efficiently. It promises a wide variety of uses beyond the described...

Carnation Terminal, Oakland?Preliminary Design
The Preliminary Design process is examined as it was applied to design of wharves for a new container terminal in the Port of Oakland, California. The process includes active interdisciplinary...

 

 

 

 

Return to search