Fluid Dynamics at the Carotid Bifurcation
Arterial wall distensibility is believed to be of secondary importance to the general flowfield of the human carotid artery. However, it has been reported that it may have greater influence...
A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...
The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
A Discussion of the Numerical Modeling of Sea Ice Ridging
Pressure ridging, is the failure mechanism of the Arctic pack ice in compression. The large-scale compressive strength of the ice pack is determined by the aggregate of ridge building...
Predicting the Performance Limits of Soil-Culvert Systems
A finite element model for elastic plastic large deformation analysis of soil-culvert systems is presented. Predictions of this numerical model are in good agreement with failure tests...
Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...
Flow Dynamics in an End-to-End Vascular Graft Junction
A study consisting of both experimental and numerical methods was performed to determine flow dynamics in the vicinity of an end-to-end anastomosis. The experimentally determined geometries...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Compressive Strength and Characterization of Failure Modes for Polymer Concrete
The effect of aggregate type, polymer content and specimen dimensions on the compressive strength and failure modes of a polyester polymer concrete (PC) was investigated. Two aggregate...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Failure Prediction of Anisotropic Material
Basic mathematical elements of a higher order failure theory for anisotropic material are outlined. Surface closure is ensured by requiring a tensor polynomial to satisfy constraint conditions....
Modeling the Chaotic Behavior in Simple Shear Granular Flows
Simple shear granular flows have demonstrated a variety of puzzling phenomena. Both computer simulations and physical experiments have discovered particle grouping, layering and shear...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Macromodeling of Complex Composites
Dimensionally reduced p-version finite elements based on higher order theory are developed for modeling laminated composite plates and shells in the presence of cracks, notches, and delaminations....
Response of Space Structures Under Sudden Local Damage
Damages to space structures can come from such adverse events as impact by foreign objects, docking, drastic temperature changes, and exposure to radiation and charged particles. This...
The Analysis Related to the Impact of Composite Panels
In analyzing experiments under impact loading, a dynamic model is needed to solve for the deflections and strains as functions of time. For composites, where shear deformation can be very...
The Transport and Fate of Drilling Muds
The disposal of drilling muds from offshore oil platforms is of concern because of the potential effects of pollution from these muds. Both drilling muds and fine-grained bottom sediments...
Modeling 3-D Circulation Using the DSS Technique
The direct stress solution (DSS) technique allows a numerical internal mode solution for the vertical variation of shear stress, rather than velocity, in a three-dimensional circulation...
Return to search