Efficient Nonlinear Analysis of Column-Supported Cylinderical Shells
This paper presents a finite element methodology for the study of geometrically nonlinear behavior of column-supported cylinder. Due to the discrete nature of the column supports, the...

Performance and Analysis of Frames With URM Infills
The interaction of unreinforced hollow concrete block masonry (URM) infill walls and gravity load designed (GLD) frames has been studied at Cornell University. The primary goal of this...

Behaviour of Concrete Masonry Infill - Steel Frame Structures
Twenty-eight masonry shear panels infilled in steel frames were tested to ultimate strength under in-plane, horizontal loading applied at roof level. The parameters investigated in this...

Experimental Evaluation and Finite Element Analysis of Masonry-Infilled R/C Frames
Eleven tests were conducted on 1/2-scale, single-story infilled frame specimens to study the influence of the relative strengths of the infill panels and the bounding frames and the frame...

Distributed Flexibility Models for Nonlinear Analysis of RC Structures
The application of distributed flexibility member models in inelastic analysis of reinforced concrete (RC) structural systems is examined. While the utilization of flexibility-based formulations...

RC Beam-Column Element for Nonlinear Frame Analysis
Recent studies have shown that beam-column finite elements that enforce equilibrium rather than compatibility along the element are better suited for the description of the strength and...

Nonlinear Earthquake Analysis of Concrete Gravity Dams Including Sliding
The sliding stability of a concrete gravity dam during a design earthquake must be investigated to assess the seismic safety of the dam. A new numerical procedure for solving the equations...

Finite Element Analysis of Shear in RC Girders
Two complementary approaches are presented to model the shear behaviour of reinforced concrete structures. A local one, based on a probabilistic modelling of cracking, accounts for local...

Fast Monte Carlo Simulations and Safety Index Checking
This paper presents recent techniques which require a small number of simulations to assess the structural reliability. They combine both the concept of importance zones in the random...

Wave Run-Up and Reflection on a Permeable Sea Wall
The swash oscillation on a sloping seawall made of step-shaped concrete blocks, waves and water particle velocity in front of the seawall were measured. It was inferred that incident waves...

The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...

Dynamic Loading of Airfield Pavements Caused by Aircraft Operations on Rough Runways
This paper presents results for dynamic pavement loading of various aircraft under takeoff and taxing scenarios. The data were obtained from computer simulation and applied to the Corps...

The Use of Crumb Rubber Modifier in Hot-Mix Asphalt
This paper summarizes the literature on the use of CRM as an additive in HMA. Wet and dry processes are discussed and the objective of each explained. Material, design and construction...

Utilization of Phosphogypsum-Based Slag Aggregate in Portland Cement and Asphaltic Concrete Mixtures
This study centers around the potential utilization of phosphogypsum-based slag aggregate as a substitute for coarse aggregate in both portland cement and asphaltic concrete surfaces for...

Recycling Portland Cement Concrete Pavement at the Contractor's Option
This paper summarizes three portland cement concrete airfield pavement recycling projects at the Outagamie County Airport in Appleton, Wisconsin. The specifications for the projects did...

Nighttime Cement Concrete Pavement Replacement Seattle-Tacoma International Airport
Several airfield improvement projects are currently underway at Seattle-Tacoma International Airport (Sea-Tac), many of which are being constructed using cement concrete pavement. Due...

Hydraulic Properties of Surface Runoff on Ash-Mixed Concrete Pavement
The disposal of incinerated sludge ash from wastewater treatment plants is becoming an increasingly difficult problem in highly populated cities. The feasibility of reusing sludge ash...

Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...

Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of Concrete Watertight Structures and Hazardous Liquid Containment is to provide a practical guide for practicing engineers who...

Rehabbing Bridges Under Traffic
Four urban examples demonstrate how an owner's decision to keep it open during rehabilitation construction forces the designers to contend with an extra set of problems. Reanchoring...

 

 

 

 

Return to search