Why Bifurcation: A Study of a Reticulated Dome
Numerical results for a hexagonal lattice dome subjected to uniform gravity loading are presented. We demonstrate that a perfect nonlinear bifurcation analysis plays a crucial role in...
Development of Skewed Element for the Concrete Pavements
In the recent years, highway engineers introduced skewed joints in the concrete pavement with a 4 foot to 5 foot skew on a 24 foot width pavement, which results in only one wheel crossing...
An Overview of the U.S. Coordinated Program for Masonry Building Research
The U.S. Coordinated Program for Masonry Building Research is a time-phased set of specific research tasks addressing materials, component and system behavior. The objective of the program...
In-Plane Behavior of Concrete Masonry Coupled Walls
To study the in-plane seismic resistance of multi-story masonry coupled walls, 6 full-scale reinforced masonry specimens, each two stories high, are being constructed and tested in the...
Use of Experimental Data to Develop Probable Behavior
The intent of this paper is to present results of research that studies the performance of the University of Colorado walls tested by Professor Benson Shing. These walls would be classified...
Influence of Nonlinear Models on Dynamic Displacements
This research is a part of an ongoing multi-year program that is sponsored by the National Science Foundation and conducted under the TCCMAR (Technical Coordinating Committee for Masonry...
Vibration Control Damper Using Sloshing of Water
The objective of this study is to develop a method of reducing wind-induced vibration of long-period structures utilizing sloshing of water in tanks added to the upper part of the structures....
Durability Design for Concrete Bridge Structures
The concept of durability design for concrete structures including bridge structures is proposed on the basis of comprehensive evaluation of materials, design details and construction...
Dynamic Response Prediction for Earthquake Resistance Design of Bridge Structures
Newly developed nonlinear analysis procedures for assessing the earthquake resistance of bridges have been incorporated into the computer program SEISAB (SEISmic Analysis of Bridges)....
Reliable Displacements from Integrated Quick-Release Accelerograms
A new baseline correction method has been developed which allows accelerograms collected during quick-release tests of full scale structures to be doubly integrated to displacements. The...
Effects of Vertical Motion on the Inelastic Behavior of Highway Bridges
The response of typical highway bridges to the vertical component of earthquake ground motion has a significant effect on their elastic behavior. When vertical motions are considered along...
Rapid Visual Screening of Buildings for Potential Seismic Hazards
A Rapid Screening Procedure (RSP) developed for use nation-wide is based on a 'sidewalk survey' of a building, in which a Data Collection Form is completed by...
Experimental Study on Structural Control for Seismic Loads Using Passive and Active Devices
The feasibility of controlling the responses of structures against seismic loads is investigated through some experiments and numerical analyses for both the passive and active control...
Bond and Dowel Action of a Main Bar in a RC Beam
The bond and dowel action are analytically treated independently on each other in most cases. The bond behavior may be, however, much affected by the dowel action in structural members....
ATC-23: A Survey of California Hospitals for Earthquake Survivability Potential
In September, 1986 the SSC recommended the completion of a survey of existing acute care hospitals as the first step in a program to bring about the upgrading of all pre-1973 hospitals...
ATC 14: A Methodology for the Seismic Evaluation of Existing Buildings
A new method for evaluating the seismic resistance of existing buildings has been developed based on the historic performance of buildings in past major earthquakes. This methodology identifies...
Postearthquake Safety Evaluation of Buildings
Procedures for the safety evaluation of buildings in earthquake damaged areas have been developed. Two evaluation techniques, Rapid Screening and Detailed Inspection, are described. Rapid...
Earthquake Damage Estimates of Conventional and Isolated Structures
The philosophy inherent in current seismic design codes for buildings accepts the premise that there will be both structural and non-structural damage but that life safety will be preserved....
Forced Vibration of Sliding Base Structural Systems
An analytical and experimental study of the effect of a horizontal sliding plane on the dynamic response of a single-story structure subjected to harmonic motion is presented. There is...
Earthquake Resistant Design Using Friction Pendulum Connections
The Friction Pendulum System (FPS) offers a simple approach for increasing a structure's earthquake resistance. The approach uses steel connections which absorb earthquake...
Return to search