ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Water Distribution System Design by Chance-Constrained Model
The objective of this paper is to present an optimization model for the design of water distribution systems considering the uncertainty in required demands, required pressures, and pipe...

Reliability Analysis of Pumping Stations and Storage Facilities
The methodology presented for pumping stations is based upon three models: a supply model, a demand model, and a margin model. The supply model considers so-called states of a system which...

Model for the Optimal Rehabilitation and Replacement of Water Distribution System Components
The objective of the model presented is to determine the minimum cost solution, given the nonlinear nature of the equations required to describe the cost and the hydraulics of a water...

Comparing Two Estuarine Mass Transport Models
Two simplified mass transport models for partially mixed estuaries were evaluated using data from the Patuxent and James Estuaries. The first of the models was developed by Pritchard in...

Three-Dimensional Modeling of Estuarine Circulation and Contaminant Transport
The conjunctive use of optimal grid and the generalized 3-D hydrodynamic model allows accurate and efficient simulation of realistic estuarine circulation and transport problems. Sheng...

Modeling the Effect of Weirs on Reservoir Releases
A computer model was developed to examine the influence of weirs on the rise of water levels and increases in velocities from reservoir releases. The model allows for investigation of...

Spring Creek Dam is Ready for the PMF: A Case History
Spring Creek Dam is the first earth embankment dam in Colorado, with inadequate spillway capacity, to be modified utilizing roller compacted concrete (RCC). With a structural height of...

Modelmania
The idea that model testing could be useful in planning for the control of water in rivers and other waterways received little support in this country until John R. Freeman's...

Evaluation of Sand as a Modeling Material Using Vellinga's Guidance
An experimental series of flume tests were conducted using three sizes of sand as modeling sediment in order to evaluate the effect of sediment grain size and the range of validity of...

Advanced Concept for Generation of Waves in Hydraulic Models
This paper describes a new wavemaker for the generation of naturally occurring waves in physical models of coastal areas. Recent research incorporating directional aspects of monochromatic,...

Hydraulic Model Investigation of the North Diversion Structure, Albuquerque, New Mexico
The North Diversion Structure diverts storm runoff around Albuquerque, New Mexico. Observed flow conditions have caused concern about the capacity of the structure and the safety of a...

Physical Modeling to Study the Extent of Removal of an Existing Lock and Dam on the Mississippi River
Locks and Dam No. 26 is located on the Mississippi River approximately 202. 9 river miles above the mouth of the Ohio River. This paper will discuss the utilization of a physical model...

Uncertainty in Models for Environmental Management
In recent years, computer models have become increasingly popular as tools to aid the decision-maker in balancing complex, interacting factors in environmental management and pollution...

Network Analysis for Water Supply Reliability Determination
The availability of water at a point in a distribution network is expressed in terms of the reliabilities of the components which comprise the different paths to the point from the source....

Capacity Expansion of Water Distribution Systems?A Case Study
Capacity expansion and necessary capital improvements to meet the water supply demand for years 1990-2020 for the U. S. Route 1 corridor development from South Brunswick to Princeton,...

Developing a User Friendly System for Water Distribution Management Applications
A hydraulic computer model of a water distribution system that can be updated with current billing (customer meter readings) information automatically. The model was calibrated with field...

Vegetal Protection of Embankments and Spillways
Recent advances in the application of tractive stress to the design of grass-lined open channels are used to develop a tentative procedure for analyzing the hydraulic performance of vegetated...

Limitations of Saint Venant Equations to Model Flood Waves
The subject of this paper is in direct contrast to all previously known research efforts. Previous effort has focused on simplified forms of Saint Venant using approximate routing models...

Modeling Unsteady One Dimensional Open Channel Flow Using the Slope Friction Form of the Saint-Venant Equations
The flow of water in open channels has been an important research topic for many years. In 1871, B. De. Saint-Venant published a set of equations that attempted to quantify the physical...

Improved Robustness of the NWS DAMBRK Algorithm
The combination dam breach and flood routing numerical model called DAMBRK has been developed by the National Weather Service (NWS) for forecasting river flooding events (Fread, 1984)....

 

 

 

 

Return to search