Haunches and Hangers
The $210 million VA Medical Center at Houston features a structural system as innovative for the 1990s as the interstitial space concept was in the 1960s. The medical center, designed...
High Tech on Campus
Hannan Hall, the new laboratory building at The Catholic University of America, has a structure entirely made up of precast concrete panels and 24 in. deep double tees. The loadbearing...
Analyzing in 3D
Suggestions for modeling and evaluating three-dimensional (3D) structures are presented. These suggestions are based on the authors' sixteen years of day to day involvement...
Expressway Centerpiece
The center span of the Napoleon Bonaparte Broward Bridge, better known as the Dame Point Bridge over the St. Johns River at Jacksonville, Fla., is the country's longest cable...
Floating Membrane Supertankers: Are They Feasible?
Optimal shapes of long cylindrical membrane containers are obtained by restricting the circumferential membrane stress to be tensile and constant throughout the tanker. Optimality is achieved...
Some General Remarks on the Structural Behavior and Load-Extension Characteristics of Coated Fabrics with Special Reference to PTFE-Coated Glass-Fiber Fabric
The understanding of fabric behavior, and of coated fabrics in particular, is essential for the design and analysis of fabric structures. Although many research papers have been published...
Cables and Flexible Pipes in Contact with Sea Floor
Flexible offshore systems can be analyzed by a number of different techniques. The techniques described herein fall in the general category of finite element methods. Special cable elements...
An Overview of Structural Reliability Methods
Recent developments in structural reliability theory and better availability of load and strength data suggest that reliability-based design (RBD) methods should be considered as a practical...
Transmission Line Structure Loading
This paper outlines specific procedures for determining loads on transmission line structure systems that can be used in the reliability based design or assessment of components of these...
Improved Techniques for Assessing Structures
The Electric Power Research Institute (EPRI) has specially designed and equipped the tower testing station located within their Transmission Line Mechanical Research Center (TLMRC) near...
Assessment of Conductors
This paper deals with the mechanical integrity of conductors after several years in service and discusses current innovative conductor designs which benefit the structural designer working...
Transmission Line Insulator Assembly Reliability
Transmission line insulator assemblies made up of ceramic or composite insulators and associated hardware are used to mechanically support and electrically isolate energized conductors...
Cambering of Steel Beams
Cold cambering with force in the fabrication shop is an effective and economical method of compensating for deflections of composite beams. Typical beams should be cambered for dead load...
Effects of Fabrication on Local Stress Conditions
Factors connected with fabrication that impact on the behavior of structural steel members are reviewed. Residual stresses that result from basic steel production and subsequent fabrication...
Effect of Imperfections on Structural Performance
This paper briefly describes the effect of initial crookedness and residual stress on the behavior of steel members. Both imperfections are unavoidable consequences of modern fabrication...
Engineering Design Concerns Regarding Steel Fabrication
The precise fabrication of structural steel pieces is an essential part of the process leading to the satisfactory erection and connection of the individual steel elements into the final...
Repair and Rehabilitation of Damaged Steel Flexural Members
In earlier years, the primary method for repairing steel flexural members was to replace the member. However, with the cost of labor and material increasing dramatically over the last...
Six Story Tubular Atrium
The author designed an atrium structure with two stair-stepped atriums placed at 45? to the tower 'Figueroa at Wilshire' in Los Angeles, California. This structure...
Toronto Skydome Retractable Roof Stadium?The Roof Concept and Design
The Toronto SkyDome is a first of its kind sports stadium with a retractable roof which results in, essentially, a fully open air stadium with the roof fully retracted. This unique roof,...
The Fabrication and Erection of the Minneapolis Convention Center
A new convention center is part of the City of Minneapolis' successful plan to maintain an economically strong downtown core. It is the latest addition to a list of civic...
Return to search