Characteristics of Flow Over the Bucket with Gradually Varied Curvature
The bucket of a high spillway dam or a spillway tunnel is one of the parts that easily to be damaged by cavitation. A new type of bucket curve was suggested with gradually varied curvature...
Perturbation Solution to 3-D Nonlinear Cavity Flow Problems
A 3-D nonlinear problem of fully cavitating flow past an axisymmetric body at a small angle of attack is investigated by the perturbation method. The first three order perturbation equations...
Time-Domain Transmitting Boundary Condition in Fluid-Structure Interaction Studies
One of the major difficulties in the nonlinear analyses of fluid-structure interactions has been the lack of exact expressions for the transmitting boundary in the time domain. Researchers...
Large Deformation Analysis of Cardiac Structures
The finite element technique can be used to simulate the response of the cardiac structures that have complex shape and geometry and nonlinear material properties. This paper enumerates...
Simulation of Blood-Heart Interaction: Validation of Approach
An existing pressure correction method to model unsteady flow with arbitrarily moving boundaries has been adapted to simulate the interaction of three-dimensional blood flow with a mitral...
Finite Analytic Explicit Scheme for Viscous Burgers' Equation
Burgers' equation is numerically analyzed by finite analytic method. The basic idea of finite analytic method is to incorporate the analytic solution of partial differential...
In-Vitro Measurement of Static Contact Pressure Distribution in Synovial Joints
The objective of this presentation is, at first, to review the various approaches to the measurement of contact pressure distribution in synovial joints, and then to describe the development...
Biomechanics of Local Articular Incongruities
Abnormalities of intra-articular contact near sites of local surface incongruity are frequently associated with secondary osteoarthrosis. We here review a series of experimental and computational...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
Contact Problems in Cell Adhesion
Adhesion of biological cells plays an important role in many physiological processes. For instance, the adhesion of killer T-lymphocyte to its target cell is an essential step in cytolysis,...
A Two-Dimensional Model of Airbag Deployment
An interactive program was developed to simulate the unfolding and deploying process of a driver side airbag in the sagittal plane. The airbag was represented by a series of nodes. We...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
Elasto-Plastic Analysis of Frames with Bending Moments and Axial Force Interaction
A menu driven computer program has been developed for Nonlinear analysis of plane framed structures. This program utilizes the stiffness method. Only material nonlinearity has been considered....
Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...
Buckling of Lamianted Plates Using h-p Finite Strips
The paper presents a computationally efficient alternative to the finite element method for the initial buckling analysis of long, shear-deformable composite laminates. In addition the...
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Stability Analysis of Nonlinear Frames
The second stiffness method for large deformation in-elastic stability analysis of frames is discussed. Displacement control methods for tracing the path beyond the limit point are presented....
A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....
Thermal Effects in a Transient Study of Fracture
Studies, e.g. Zehnder and Rosakis (1989), indicate that fracture is associated with temperature rises in inelastic zones near the crack edge. To gain more insight into this phenomenon,...
Characterizing Mode I Fatigue Delamination of Composite Materials
Evaluation of two techniques to characterize fatigue delamination using the double cantilever beam (DCB) specimen are presented. The two techniques were the delamination growth onset (G-N)...
Return to search