Development of Storage Demand Relation for Reservoirs?A Probabilistic Approach
This paper presents a practical method for developing storage-demand relation for reservoirs by a probability analysis of the stream flow data. The method was employed by the author for...
Probability of Bridge Failure Due to Pier Scour
Methods have been presented for computing the probability of bridge failure due to pier scour either using a maximum scour depth model or a time-dependent model. The probability of failure...
Engineering Mechanics
This proceedings,
A More Rational Approach to Pavements
It is the intent of this paper to demonstrate how purely probabilistic arguments can be used to formulate a rational (phenomenonological) model of the particulate media that comprise pavement...
Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...
Probabilistic Mechanics and Structural and Geotechnical Reliability
This proceedings consists of summary papers for the thirty-six technical sessions of the 6th ASCE Specialty Conference on Probabilistic Mechanics, and Structural and Geotechnical Reliability....
Probability of Wave Force on Horizontal Members
This study is motivated by the works of Isaacson and Subbiah (1990) to evaluate the vertical wave force on a rigid horizontal member located in the vicinity of still water level with its...
Application of Fracture Mechanics Methodology to Assessment of Weld Defects in Offshore Platforms
This paper demonstrates an application of both deterministic and probabilistic fracture mechanics methods to assess weld defects in an offshore platform. The results of the assessment...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
Impact of Cold Weather on Building Construction Scheduling
Weather impact on a building construction schedule is often significant in cold regions. Most deterministic scheduling methods are unable to directly account for the effects of weather...
A Conceptual Model for Vertical Frazil Distribution in Turbulent Flows
A conceptual model is presented for the evolution of frazil over depth in a turbulent flow. The net upward migration due to buoyancy of the frazil is opposed by intermittent mixing induced...
Small-Scale Meteorology of Freezing Precipitation
Freezing rain and glazing are extremely disruptive to transportation, communication and power transmission. Local variations in the occurrence of freezing rain may be difficult to forecast....
Effect of Grain Size Variation on Damage in Polycrystalline Ice
This paper studies the effect of grain size distributions on damage accumulation in polycrystalline ice under uniaxial compression. The numerical results are derived from the internal-variable...
Effect of Material Heterogeneities on Flow Through Porous Media
Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations...
A Probe Method for Measuring In Situ Rock Thermophysical Properties
The application of a thermal probe method for in situ thermophysical property measurement is analyzed. The REKA method (Rapid Evaluation of k and alpha) involves a single-borehole probe...
Durability, Mechanical, and Thermal Properties of Experimental Glass-Ceramic Forms for Immobilizing ICPP High Level Waste
The high-level liquid waste generated at the Idaho Chemical Processing Plant (ICPP) is routinely solidified into granular calcined high-level waste (HLW) and stored onsite. A research...
Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....
Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...
System Analysis Dual-Purpose Repository New Results of Temperature Calculations
As design concept for a high-level waste (HLW) final repository the emplacement of reprocessing wastes and spent fuel elements of different types in a common repository is being studied...
Return to search