Geologic Assessment of Seismotectonic Hazards
Design and modification of dams require evaluation of potential seismotectonic hazards based on consideration of the historic earthquake record and deterministic evaluation of geologic...
Seismic Response Component in the Risk Assessment of Dams
The risk analysis model for dams that is discussed in this paper considers the probability of an initiating event and the following conditional probabilities of the system response, the...
Seismic Decision Analysis for Jackson Lake Dam
This paper presents a framework for decision analysis that can be applied to seismic dam safety problems. The framework provides a means for displaying uncertainties in a manner that allows...
Optimum Cut-Outs on Plate Stability
Cut-outs are unavoidable in some of the plate components. To minimize the plate weight, in the meantime, to maintain the critical buckling load as high as possible is one of the major...
Stability of Cylindrical Shells With and Without Cutouts and Subjected to Wind Load
The cylindrical storage tanks with and without cutouts are analyzed using nonlinear finite element analysis. All the cylinders are fixed at the base. Two types of cylindrical tanks without...
Behaviour of Thin-Walled Channel Sections in Bending
The effects of local buckling on the behaviour and load carrying capacity of thin-walled cold formed steel plain channel sections is examined. The bending is applied in such a way that...
General Considerations for Seismic Stability
The basic design consideration is provision of sufficient stiffness, strength and adequate ductility for the varied loads imposed on the building. Adequate stiffness is needed to resist...
Code Designed Steel Frame Performance Characteristics
Three similar steel ductile moment-resisting frame structures designed in accordance to the Uniform Building Code (1976-1985) are evaluated for their performance characteristics during...
Maximum Response of Buildings to Multi-Seismic Input
The paper presents a technique of determining the maximum response of a torsionally-translationally coupling structure subjected to three ground translational components. It was found...
Lateral Impedance of Contact Pile Foundations
The static and dynamic lateral impedance of pile foundations for which there is continuous contact between the bottom of the pilecap and the underlying soil is investigated. A parametric...
Probability of Facility Damage From Extreme Wind Effects
A probabilistic methodology has been developed to assess the risks of extreme wind induced damage to structures and facilities. The wind effects considered include dynamic pressure, atmospheric...
Uncertainties in Wind Loads Caused by Adjacent Buildings
Mean and fluctuating values of all three moment components caused by wind acting on small-scale models of tall prismatic buildings have been measured. Measurements were made in a boundary-layer...
Risk Assessment for Cladding Panels: An Expert Systems Approach
Risk assessment for structures in the context of wind engineering involves many factors such as wind hazard, the wind sensitivity of the structure and the socio-economic value of the structure....
Assessment & Control of Wind Created Risk During Construction
Structures under construction have been damaged by winds. The damaging winds, typically, are much lower than the design wind loads for completed structures. Little guidance is available...
Prediction and Measurement of Wind Response: Case Story of a Wind Sensitive Building
The wind-induced horizontal accelerations of a 43 story office tower in New York City were monitored during 11 occasions over a period of about six months. The building dates back to the...
Measuring the Spatial Characteristics of Unsteady Pressures
This paper has reviewed current methods of determining spatially-averaged time-varying wind loads on wind tunnel building models. Some of the possibilities opened by simultaneous multi-channel...
The Application of Aerodynamic Model Tests to Wind Loading of Tall Buildings
The theory of the aerodynamic model test, in which the wind response of tall structures can be computed for a range of dynamic properties from a measurement of the external wind load,...
Field Experiments for Wind Pressures
A project is underway at Texas Tech University to acquire wind and building surface pressure data in the field. Objectives of the project are to obtain a reliable data base for external...
Research Needs to Resist Terrorist Attacks
The task of protecting facilities against terrorist attacks is very much a new problem for the U. S. civilian sector. Guidance as to what steps need to be taken by a municipality or a...
Improved Design Procedure for Shallow-Buried Structures to Resist Airblast Loading
Both conventional and nuclear weapons generate airblast loads of sufficient magnitude that structure survival at acceptable cost favors below grade construction. The design of shallow-buried...
Return to search