ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Aerodynamic Stability of Long Span Suspension Bridge?Effects of Stiffening Truss Width
This paper presents the effects of truss width upon the aerodynamic stability of the long span suspension bridge with truss girder up to 2000 m. It was found that the truss width had a...

Codification of Wind Effects for a Long Span Suspension Bridge
Construction of the Akashi Kaikyo Bridge, which will cross the Akashi Kaikyo Straits with a shore-to-shore of approximately 4 km, started in spring of 1988. Firstly discussions on the...

Status of Structural Engineering Research
Problems and opportunities for structural engineering research are being addressed in a study by the ASCE Structural Division Task Committee on Structural Engineering Research Needs/Funding....

Toward an LRFD-Based AASHTO Bridge Specification
During the 1987 AASHTO Bridge Committee Meeting, recommendations from NCHRP Project 20-7/31 regarding the development of a probability-based LRFD bridge specification were accepted. NCHRP...

Bridge Loading Evaluation for Limit States Design in Japan
Some statistics regarding bridges in Japan are firstly explained. Next, the limit states design which will be introduced in 1995 for highway bridge design specification in Japan is briefly...

Fatigue Life Evaluation of Welded Structural Details in Steel Highway Bridge
Stresses in highway bridge members, fatigue crack propagation behavior and long life fatigue strength properties of welded members under traffic loadings and prediction of fatigue life...

Evaluation of Bridge Safety and Remaining Life
In developed countries, the emphasis on the infrastructure is changing from new construction to the safe maintenance of existing structures. Highway bridges represent an excellent example...

Study and Design of Multi-Span Continuous Bridge
Multi-span continuous bridges which have been constructed in the Metropolitan Expressway Public Corporation are briefly explained. Some studies were carried out into their behavior. The...

LRFD: Progress for Engineers and the Wood Industry
The LRFD for Wood project represents a milestone for the industry. The significance of the project goes far beyond merely switching formats in design equations. The project signifies both...

Safety Evaluation and Verification by Field Testing of Concrete Bridges
This paper describes a method of safety evaluation of concrete bridges in service and the verification of the evaluated results by field tests. The field tests to evaluate structural safety...

Reliability Models for Bridge Structures
The development of rational design criteria requires efficient measures of structural performance. Traditional methods of analysis do not reveal the actual safety reserve (degree of redundancy)....

Inelastic Earthquake-Resistant Design of Bridges?Application to Concrete Cable-Stayed Bridges
Various methods of earthquake-resistant design of bridges use in both the U.S. and Japan are summarized and reviewed. Among them, principles of approximate and rigorous inelastic earthquake...

Seismic Design of Cable-Stayed Bridges: Evaluation and Research Needs
Earthquake-response characteristics of cable-stayed bridge are evaluated. 2-D and 3-D models are considered. The cases of multiple-support and uniform excitations are considered; furthermore,...

Current Bridge Research at Iowa State University
For the past 20 years the majority of the structural engineering faculty in the Department of Civil and Construction Engineering at Iowa State University (ISU) have performed research...

Remote Automatic Data Acquisition Systems
Personal computers have been used on two projects to monitor peformance of structures in an automatically triggered mode. In both cases a local PC is used to continually monitor a triggering...

The Measurement of Structural Deflections
A basic parameter to be determined when assessing the performance of structures is the stiffness. This involves the measurement of static and/or dynamic deflections at representative locations...

Development of Skewed Element for the Concrete Pavements
In the recent years, highway engineers introduced skewed joints in the concrete pavement with a 4 foot to 5 foot skew on a 24 foot width pavement, which results in only one wheel crossing...

Dynamic Characterization of Posttensioned Rods in Stressed Timber Systems
A new approach is presented to monitor the levels of force in posttensioning rods in stressed timber systems. The dynamic response of the rod under an impact load is characterized and...

Durability Design for Concrete Bridge Structures
The concept of durability design for concrete structures including bridge structures is proposed on the basis of comprehensive evaluation of materials, design details and construction...

An Education in Tunneling
In this follow-up to the author's article in the April 1989 issue of Civil Engineering, this senior civil engineer and winner of the 1988 Martin Kapp Foundation Engineering...

 

 

 

 

Return to search