Analyses of Sediment Transport Data by Microcomputer Software
The MINITAB statistical software project has been popularly used on mainframe computers since 1972. In June 1984, a subset of the program was made available for the IBM-PC microcomputer;...
A Microcomputer Program for River Sedimentation
Erosion and deposition of sediment in rivers causes numerous problems. In order to describe this process, both the hydraulic properties of the river and the mechanics of sediment transport...
Data Acquisition and Analysis of Pressure Fluctuations in Hydraulic Jumps
The paper reports on a study to procure basic data on large pressure fluctuations in hydraulic jump stilling basins. Interest in pressure fluctuations relates to: the effect of dynamic...
Transients in Empty Pipes Subject to Rapid Filling
A mathematical model was developed to simulate the pipe filling process and the pipe forces based on incompressible water column theory. The method easily accomodates appropriate boundary...
How Will People Movers Affect Downtown Areas?
The year 1980 was a pivotal one for the downtown automated people mover development process in both Detroit and Miami. In that year both cities completed their preliminary engineering/environmental...
The Neglected Challenge in Metropolitan Area Transportation
The central fact about metropolitan area transportation is the gross mismatch between the medium and low density patterns of settlement that are dominating the evolution of metropolitan...
Investigation of Design Criteria for APM Guideways
Designers have relied mostly on the provisions of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Highway Bridges. Sometimes...
Human Interface Design of an APM Control Center
The control center of an Automated People Mover (APM) system is a man-machine system. Both software and hardware aspects of the design of the monitor room that directly affect ease of...
A New Alternative in Steel Construction?Partially Restrained Connections
Lack of formal training in methods as well as the lack of specific guidelines have limited the understanding and utilization of semi-rigid connection technology. A renewed interest in...
The Effect of Connection Flexibility on Steel Members and Frame Stability
With the advent of Load and Resistance Factor Design (LRFD) and the many existing moment-rotation curves for connections, the use of actual connection flexibility in the design process...
Buckling of Flexibly-Joined Simple Frames
A nonlinear analysis of plane elastic frames is presented. The static loading consists of both eccentric concentrated loads (near the joints) and uniformly distributed loads on all or...
An In-Plane Finite Element Model for Brick Masonry
A finite element model for brick masonry is reported. The model takes account of non linear deformations and progressive local failure. The failure may occur in the joints alone or in...
Behavior of Cavity Masonry Walls Under Out-of-Plane Lateral Loading: An Analytical Approach
In this paper, a finite element model is used to analyze cavity walls in an attempt to understand their complex behavior and to evaluate the adequacy of the assumptions embodied in the...
Shear Design of Masonry Walls
The paper presents a summary of a research project carried out at the Swiss Federal Institute of Technology Zurich to develop a design method based on the ultimate strength of masonry...
Load-Bearing Capacity of Masonry Walls in a Critical Buckling Condition Taking Into Account the Restraining Effect of Floor Slabs
This paper studies the buckling effect of masonry walls and concrete floor slabs as a frame system. The frame is calculated according to the theory of II. order. The buckling length, the...
Wall/Floor-Slab Interaction in Brickwork Structures
The paper summarises the results of three series of tests on sections of brickwork structure carried out with a view to determining the characteristics of wall/floor slab joints in terms...
Learning from Failures: Procedural Changes in the Design and Construction Process to Reduce Failures
This paper first defines failures and their number and scope in the design and construction fields. It then presents the writer's opinion as to the cause of the failures and...
Decision Support System for Tunneling
This paper first discusses methodologies for considering geological uncertainty in tunneling projects and for determining the most economic excavation and support methods under such condition;...
Revitalization of Existing Buildings: An Owner's Perspective
Revitalization of the large stock of existing buildings in this country is of paramount importance today to building owners, who want the value of existing properties to appreciate as...
Analysis of Cracking of I79 Bridge at Neville Island
A large crack was discovered to form in a girder of the I-79 Glenfield Bridge over the back channel of the Ohio River near Pittsburgh on January 28, 1977. A section of the girder containing...
Return to search