Why Bifurcation: A Study of a Reticulated Dome
Numerical results for a hexagonal lattice dome subjected to uniform gravity loading are presented. We demonstrate that a perfect nonlinear bifurcation analysis plays a crucial role in...
Inelastic Performance of Single-Story Masonry Shear Walls
Twenty-two story-height reinforced masonry shear walls have been tested to examine the influence of the applied axial stress, and the amount of vertical and horizontal reinforcement on...
In-Plane Behavior of Concrete Masonry Coupled Walls
To study the in-plane seismic resistance of multi-story masonry coupled walls, 6 full-scale reinforced masonry specimens, each two stories high, are being constructed and tested in the...
Nonlinear Finite Element Analysis of Experiments on Two-Story Reinforced Masonry Shear Walls
Nonlinear, static finite element analyses are being used for correlation with experiments conducted on one-story reinforced masonry shear walls, and for the prediction of and correlation...
Use of Experimental Data to Develop Probable Behavior
The intent of this paper is to present results of research that studies the performance of the University of Colorado walls tested by Professor Benson Shing. These walls would be classified...
Influence of Nonlinear Models on Dynamic Displacements
This research is a part of an ongoing multi-year program that is sponsored by the National Science Foundation and conducted under the TCCMAR (Technical Coordinating Committee for Masonry...
Vibration Control Damper Using Sloshing of Water
The objective of this study is to develop a method of reducing wind-induced vibration of long-period structures utilizing sloshing of water in tanks added to the upper part of the structures....
Dynamic Response Prediction for Earthquake Resistance Design of Bridge Structures
Newly developed nonlinear analysis procedures for assessing the earthquake resistance of bridges have been incorporated into the computer program SEISAB (SEISmic Analysis of Bridges)....
Reliable Displacements from Integrated Quick-Release Accelerograms
A new baseline correction method has been developed which allows accelerograms collected during quick-release tests of full scale structures to be doubly integrated to displacements. The...
Experimental Study on Structural Control for Seismic Loads Using Passive and Active Devices
The feasibility of controlling the responses of structures against seismic loads is investigated through some experiments and numerical analyses for both the passive and active control...
Bond and Dowel Action of a Main Bar in a RC Beam
The bond and dowel action are analytically treated independently on each other in most cases. The bond behavior may be, however, much affected by the dowel action in structural members....
ATC-23: A Survey of California Hospitals for Earthquake Survivability Potential
In September, 1986 the SSC recommended the completion of a survey of existing acute care hospitals as the first step in a program to bring about the upgrading of all pre-1973 hospitals...
Postearthquake Safety Evaluation of Buildings
Procedures for the safety evaluation of buildings in earthquake damaged areas have been developed. Two evaluation techniques, Rapid Screening and Detailed Inspection, are described. Rapid...
Consequences and Achievement of Supplemental Damping for Improved Seismic Performance
An earthquake resistant design philosophy which relies upon increased stiffness and damping rather than increased strength and ductility has been investigated. The effect of adding supplemental...
Earthquake Damage Estimates of Conventional and Isolated Structures
The philosophy inherent in current seismic design codes for buildings accepts the premise that there will be both structural and non-structural damage but that life safety will be preserved....
Forced Vibration of Sliding Base Structural Systems
An analytical and experimental study of the effect of a horizontal sliding plane on the dynamic response of a single-story structure subjected to harmonic motion is presented. There is...
N-Pad?A Three-Dimensional Program for the Analysis of Base-Isolated Structures
N-PAD is a three-dimensional computer program especially written for the analysis of base-isolated structures. The program is designed with the ability to model various types of isolation...
System Identification of Earth Dams Using Seismic Records
A technique to identify the elasto-plastic dynamic properties of earth dams and, therefore to asses the capabilities and limitation of their models, is developed. The technique is based...
System Identification of Meloland Road Overcrossing
The Meloland Road Overcrossing (MRO) is a two-span reinforced concrete bridge structure located east of El Centro, California, 0.3 mi from the Imperial Fault. The Imperial Valley Earthquake...
System Identification of a Large Structure Using Pseudo-Dynamic Test Data
This paper deals with structural modeling and the determination of optimal nonlinear models by applying system identification techniques to inelastic pseudo-dynamic test data from a full-scale,...
Return to search