Advancement in Tidal Hydraulics
This paper will discuss advances in the field of tidal hydraulics since the inception of the ASCE Hydraulics Division 50 years ago. Activities of the Committees on Tidal Hydraulics of...
Contributions by the Hydraulics Division of ASCE to the Advancement of Ground-Water Hydrology
Papers related to ground-water hydrology published in Proceedings of the ASCE and in Hydraulics Division journals from 1938 through mid-1988 are briefly summarized. The areas covered are...
Research in ASCE's Hydraulics Division
Research in the Hydraulics Division of ASCE during the last 50 years has undergone changes in both technical content and procedures. Open channel flow, sediment transport and pipe flow...
Development of Hydraulic Structures
The Bureau of Reclamation was established in 1902. Since that time, Reclamation has constructed more than 220 dams. Each dam, depending on its function, has two or more principal hydraulic...
Cold Regions Hydrology and Hydraulics
The Cold Regions Hydrology and Hydraulics Monograph is the eighth in a series of monographs prepared by the ASCE Technical Council on Cold Regions Engineering. The book is intended to...
Wind Bracing
This chapter discusses the structural design of the bridge with regards to wind forces....
Building Moon Bases
It is widely accepted that the U.S. will begin to build a base on the moon at the turn of the century, and much of the design work has already been done. Based on papers presented at Space...
Deck Park Covers Phoenix Freeway
The last link in interstate I-10, the coast to coast highway from Florida to California, will be completed in Phoenix, Arizona in 1989. The last eleven-mile section through Phoenix has...
The Pros and Cons of Public Education
Today, engineers work for a public that has lost faith in the government's ability to spend money efficiently and to contain pollutants effectively. Many engineers now see...
An Overview of Structural Reliability Methods
Recent developments in structural reliability theory and better availability of load and strength data suggest that reliability-based design (RBD) methods should be considered as a practical...
Assessment of Conductors
This paper deals with the mechanical integrity of conductors after several years in service and discusses current innovative conductor designs which benefit the structural designer working...
Cambering of Steel Beams
Cold cambering with force in the fabrication shop is an effective and economical method of compensating for deflections of composite beams. Typical beams should be cambered for dead load...
Engineering Design Concerns Regarding Steel Fabrication
The precise fabrication of structural steel pieces is an essential part of the process leading to the satisfactory erection and connection of the individual steel elements into the final...
Six Story Tubular Atrium
The author designed an atrium structure with two stair-stepped atriums placed at 45? to the tower 'Figueroa at Wilshire' in Los Angeles, California. This structure...
The Fabrication and Erection of the Minneapolis Convention Center
A new convention center is part of the City of Minneapolis' successful plan to maintain an economically strong downtown core. It is the latest addition to a list of civic...
Changes in Tubular Design Codes
This paper summarizes a number of changes in design provisions for tubular structures that have recently been adopted. These are the result of a number of research advances concerning...
Sizing Techniques for Lateral Bracing
Techniques for determining the size of lateral bracing members in multi-story steel buildings are presented and discussed. Because the design of such bracing is usually controlled by deflection...
Double Angle Bracing Members
It has been pointed out that when a single line of bracing is used, the member is usually made from structural tubing. It has been suggested that when the loads are not too great, consideration...
Seismic Behavior of Built-Up Bracing Members
The influence of stitch design and local buckling on the seismic behavior of welded bracing members made of double angles is studied in this paper. Performance of boxed configuration with...
Simple Methods for Design of Steel Gusset Plates
This paper presents two simple methods for design of steel gusset plates. In the first method, the wedge theories are applied to establish state of stress in steel gusset plates. In the...
Return to search