Computational Failure Analysis of Reinforced Concrete Plate Structures
The paper summarizes our recent effort in developing a suitable finite element code for the failure prediction of reinforced concrete structures. The basis of the development is a plasticity...
A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....
Nonlinear Response of Ground Supported Slabs
Refined techniques for the structural analysis of ground supported concrete slabs are presented. The principles of limit state design in terms of strength and serviceability are implemented....
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...
Statistical Strength Analysis of Composites
A new modified six parameter Weibull distribution model has been adopted to analyze strength data structure of ARALL laminated and graphite-epoxy composites. This model shows better correlations...
Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...
Interparticle Sliding and Rolling
Numerical experiments are done with a continuum plasticity program in order to study the initiation and evolution of shear bands. Many elements are used in order to resolve families of...
Return to search