An Introduction to Pressurized Volumes in Space
Space habitation designers come from diverse backgrounds. As it is human nature to emphasize that which is familiar, habitat design is strongly influenced by the designer's...

Conceptual Design for a Lunar-Base CELSS
Future human exploration is key to the United States National Space Policy goal of maintaining a world leadership position in space. In the past, spacecraft life support systems have used...

Artificial Gravity Research Facility Options
On a long duration manned mission to Mars, the physiological changes caused by microgravity may be counteracted by artificial gravity. This paper evaluates several different classes of...

Partial Gravity: Human Impacts on Facility Design
Partial gravity affects the body differently than earth gravity and microgravity environments. The main difference from earth gravity is human locomotion; while the main difference from...

A Design Process for Water Distribution Systems Including Optimization
Design of a water distribution system is a multi-level process from preliminary planning to final detailed sizing of components. Unfortunately as in many design problems, a final detailed...

Upgrading Hydraulic Infrastructure for Level One Redundancy
In the current paper a methodology is presented for upgrading any single source water distribution system in order to provide a level one system redundancy at a minimum cost. A level one...

Soft Bottom Low Flow Channel?A New Approach
In 1987, the City of Boulder, Colorado requested assistance from the Urban Drainage and Flood Control District (District) to repair a problem of cattails growing in the low flow portion...

The Present of GIS
A review of geographic information systems (GIS) as a spatial database is presented. Computer aided design and relational database features of GIS are explained, as well as possible types...

Environmental Permitting a Major Expressway Facility in Florida
As general consultant to the Tampa-Hillsborough County Expressway Authority, Howard, Needles, Tammen and Bergendoff (HNTB) was responsible for the environmental permitting required for...

Restoration of a Buttress Dam
Inspections of Morris Shepard Dam on the Brazos River in Texas revealed serious defects in the dam and its foundation. Piezometric pressures below the spillway buttresses greatly exceeded...

Morris Sheppard Dam: A Rational Approach to Stability Analysis
This paper details the excessive foundation piezometric conditions found during a routine five-year inspection, and presents the results of backfigured stability analysis of a critical...

A Rational Basis for Determining Safety of Containment
Design of waste containment facilities may follow one of three tacts: (1) the liner and cover systems may have prescribed components of predetermined minimum thicknesses and hydraulic...

Review of the Design, Construction, and Operation of the Lake Carolyn Flood Control Pump Station
A review of the design, construction, and initial operation of the Lake Carolyn Flood Control Pump Station in Irving, Texas is presented. Staged water resource development design concepts...

MacIntosh II True-Color Visual Simulation Project: A Proposed Elevated Rail System for Metropolitan Phoenix
Utilizing new high-resolution, 24-bit true-color technology available for the Macintosh II microcomputer, this project enabled professional consultants and the public to visualize a proposed...

SIGNALEXPERT: An Expert Syste, for Signalized Intersection Analysis and Design
This paper presents a prototype expert system, (SIGNALEXPERT), for signalized intersection analysis and design. The SIGNALEXPERT consists of four modules. The first module determines if...

A Knowledge-Based Approach to the Design of Highway Bridge Foundations
This paper discusses the development of a prototype expert system using a commercially available expert system shell. The system is to be used for the selection of highway bridge foundations....

Generating Collision Diagrams
The paper discusses the COLLDIAG computer program which, when working in conjunction with a powerful computer-aided drafting program (AutoCAD), can generate collision diagrams for various...

Implementation of HISAM/HISAFE Microcomputer Programs
The Federal Highway Administration had sponsored the development of two software packages called HISAM and HISAFE. HISAM primarily provides an alternative means to store related accident...

Guidelines for Micro-CADD Implementation - How You Can Do it Right the First Time
This paper discusses methods found to be useful in applying selected lower cost microcomputer-CADD systems in the civil engineering environment CAD is defined as Computer Aided Drafting...

California DOT CADD
Starting in 1983 the California Department of Transportation (Caltrans) embarked on a project to incorporate current computer technology into the project development process. Today the...

 

 

 

 

Return to search